RBGPOE-CON-HP

MikroTik RBGPOE-CON-HP Price in Kenya – 48V to 24V Gigabit High-Power PoE ConverterMikroTik RBGPOE-CON-HP Price in Kenya

The MikroTik RBGPOE-CON-HP is a high-power 48V-to-24V Gigabit PoE converter designed to let network installers power compatible low-voltage MikroTik RouterBOARD devices from standard higher-voltage PoE infrastructure. It accepts a wide range of approximately 42–57V PoE sources, including passive PoE, telecom PoE, IEEE 802.3af and 802.3at PoE+, then converts that power to a 24V output suitable for compatible RouterBOARD equipment.

This makes the RBGPOE-CON-HP especially useful when a network uses 48V PoE switches or injectors, but the MikroTik device at the far end is designed for an 8–30V input range. Instead of replacing the PoE switch or installing a separate local power supply, the converter can be placed inline to reduce the incoming voltage to 24V. MikroTik rates it for up to 24W of output power, or up to 1A at 24V.

The converter also supports 10/100/1000 Mbps Gigabit Ethernet, making it suitable for high-speed network links where older 100 Mbps PoE converters would introduce an unnecessary bottleneck. MikroTik's own product history notes that this Gigabit version improves on earlier PoE converter designs that were limited to 10/100 Mbps Ethernet.

MikroTik currently lists the RBGPOE-CON-HP at a suggested manufacturer price of US$30. A current Kenyan retailer lists it at approximately KES 3,961 gross, while another Kenya-focused listing shows around KES 2,000, illustrating that local prices vary significantly according to seller, stock, VAT treatment and sourcing.

For genuine MikroTik PoE converters, routers, switches, wireless equipment and professional product-selection assistance, customers can source networking equipment through Mikrotik Kenya.

MikroTik RBGPOE-CON-HP SpecificationsSpecificationDetailsProduct CodeRBGPOE-CON-HPProduct TypeHigh-Power PoE Voltage ConverterInput PoE VoltageApprox. 42–57VOutput Voltage24VMaximum Output CurrentUp to 1AMaximum Output PowerUp to 24WEthernet Support10/100/1000 MbpsGigabit EthernetYesPassive PoE InputSupportedTelecom PoESupportedIEEE 802.3afSupportedIEEE 802.3at / PoE+SupportedOutput TypePassive 24V PoEIntended Powered Device RangeCompatible 8–30V RouterBOARD devicesEthernet Ports2Software ConfigurationNoneRouterOS RequiredNoSuggested Manufacturer PriceUS$30Typical Application48V PoE network to 24V MikroTik equipment

MikroTik's official documentation confirms that the converter accepts practically any 42–57V PoE source and converts it to high-power 24V output for compatible RouterBOARD equipment.

MikroTik RBGPOE-CON-HP Price in Kenya

Current Price Overview

Pricing ReferenceIndicative PriceMikroTik Suggested PriceUS$30Kenya Retail ListingApprox. KES 3,961 grossOther Kenya Market ReferenceApprox. KES 2,000Final Kenya Selling PriceConfirm before purchase

The difference between current Kenyan listings demonstrates why pricing should be treated as indicative rather than fixed. Stock age, exchange rates, VAT, distributor sourcing and warranty arrangements can all affect the local selling price.

What Is the MikroTik RBGPOE-CON-HP?

The RBGPOE-CON-HP is best understood as a PoE voltage converter.

It does not simply inject power like an RBGPOE. Instead, it receives a high-voltage PoE input and converts that voltage to 24V passive PoE.

A typical connection is:

48V PoE Switch → RBGPOE-CON-HP → 24V-Compatible MikroTik Device

Connection StageFunction48V PoE SourceSupplies network data + powerRBGPOE-CON-HPConverts high voltage to 24VEthernet CableCarries data + converted PoERouterBOARD DeviceReceives compatible 24V power

This solves a common problem in mixed-voltage MikroTik networks.

Key Features of the MikroTik RBGPOE-CON-HP

1. Converts 48V PoE to 24V

The core purpose of the RBGPOE-CON-HP is voltage conversion.

InputOutput42–57V PoE24V passive PoEPassive PoE24VTelecom PoE24VIEEE 802.3af24VIEEE 802.3at24V

This makes it possible to power lower-voltage MikroTik equipment from standardized 48V network infrastructure.

2. Up to 24W High-Power Output

The RBGPOE-CON-HP can supply up to 24W, equivalent to approximately 1A at 24V.

Power FeatureSpecificationOutput Voltage24VMaximum Output Current1AMaximum Power24WHigh-Power DesignYesSuitable for Higher-Draw RouterBOARD DevicesYes, within limits

This higher power budget distinguishes it from lower-capacity converters intended only for small radios.

3. Supports IEEE 802.3af and 802.3at

One of the strongest advantages of the RBGPOE-CON-HP is its compatibility with common PoE standards on the input side.

MikroTik states that it works with:

• Passive PoE

• Telecom PoE

• IEEE 802.3af

• IEEE 802.3at / PoE+

• Other supported 42–57V PoE sources

(MikroTik)

Input TypeSupportedPassive 48V PoEYesTelecom PoEYes802.3afYes802.3at PoE+YesApprox. 42–57V SourcesYes

This allows older or lower-voltage MikroTik hardware to be integrated into a modern standards-based PoE network.

4. Gigabit Ethernet Support

The RBGPOE-CON-HP supports 10/100/1000 Mbps Ethernet. (eBay)

Ethernet FeatureSpecification10 MbpsSupported100 MbpsSupported1000 MbpsSupportedGigabit EthernetYesNumber of Ethernet Interfaces2

This is particularly valuable where broadband speeds or wireless backhaul throughput exceed 100 Mbps.

5. Ideal for Mixed-Voltage MikroTik Networks

Many MikroTik deployments contain equipment with different power requirements.

For example:

• Core PoE switch operates at 48V

• Remote RouterBOARD accepts 24V

• Wireless radio accepts lower-voltage passive PoE

• Newer switches use 802.3af/at

The RBGPOE-CON-HP creates a bridge between these different powering environments.

Network SidePowered Device Side48V PoE24V passive PoE802.3af/at8–30V-compatible RouterBOARDTelecom PoE24V deviceHigh-voltage switchLower-voltage radioMikroTik RBGPOE-CON-HP and RouterBOARD Compatibility

MikroTik specifically states that the converter can power RouterBOARD devices capable of operating from 8–30V. (MikroTik)

This means it can be useful with compatible:

• Wireless radios

• RouterBOARD boards

• CPE devices

• Access points

• Point-to-point radios

• Outdoor MikroTik equipment

Always check the exact input-voltage and power-consumption specifications of the target device before installation.

Why Is a PoE Converter Needed?

A common mistake is assuming all PoE equipment operates at the same voltage.

It does not.

PoE EnvironmentTypical VoltageMikroTik Passive PoEOften around 24V, model dependentIEEE 802.3afNominal high-voltage PoEIEEE 802.3atHigher-power 48V-class PoETelecom PoEOften high-voltageRouterBOARD DeviceModel dependent

If a 24V-only device is connected directly to an incompatible 48V passive output, the result may be a failure to power or potentially equipment damage.

The RBGPOE-CON-HP converts the high-voltage source into a safer compatible 24V output for supported RouterBOARD devices.

RBGPOE-CON-HP vs RBGPOEFeatureRBGPOE-CON-HPRBGPOEMain FunctionVoltage conversionPower injectionInputPoE EthernetDC adapterOutput24V passive PoESame/pass-through DC PoE48V-to-24V ConversionYesNo802.3af InputYesNo active conversion802.3at InputYesNo active conversionGigabit EthernetYesYesMaximum Output24WDepends on supply/deviceBest ForMixed-voltage networksBasic passive PoE

The RBGPOE is useful when you already have a compatible DC power supply.

The RBGPOE-CON-HP is useful when the available source is 48V PoE, but the endpoint requires 24V passive PoE.

RBGPOE-CON-HP vs RBPOEFeatureRBGPOE-CON-HPRBPOEVoltage ConversionYesNoGigabit EthernetYesBasic/legacy depending on version802.3af InputYesNo802.3at InputYesNoPassive 24V OutputYesDepends on DC supplyHigh-Power 24W OutputYesSupply dependentBest Application48V-to-24V conversionBasic power injectionRBGPOE-CON-HP vs GPOE-USBFeatureRBGPOE-CON-HPGPOE-USBInput42–57V PoE802.3af/at PoEOutput24V PoE5V USB-C/DCMaximum Power24WApprox. 15WEthernetGigabit2.5 GigabitTarget EquipmentRouterBOARDUSB/5V equipmentRaspberry PiNot primary useYesRouterBOARD RadiosExcellentLimited

Both convert PoE power, but they target completely different voltage classes and equipment.

RBGPOE-CON-HP vs GESP+POE-INFeatureRBGPOE-CON-HPGESP+POE-IN48V-to-24V ConversionYesNoPassive PoE OutputYesYesSurge ProtectionNot primary functionYesGrounding LeadNo dedicated surge groundingYesGigabit EthernetYesYes802.3af/at InputYesSupply-dependent passive injectionMain PurposeVoltage conversionPoE + surge protection

The RBGPOE-CON-HP solves voltage incompatibility.

The GESP+POE-IN addresses surge protection and PoE injection.

Practical Deployment Example

Suppose an ISP has installed a modern 48V PoE switch but wants to reuse a compatible 24V MikroTik wireless radio.

Without a converter:

48V PoE Switch → 24V Radio = Voltage mismatch

With RBGPOE-CON-HP:

48V PoE Switch → RBGPOE-CON-HP → 24V RouterBOARD Radio

ComponentRolePoE SwitchSupplies 48V-class PoEConverterReduces voltageEthernet CableCarries Gigabit dataMikroTik RadioReceives 24V passive PoEUse with Modern MikroTik PoE Switches

MikroTik's documentation for newer PoE switches such as the CRS320-8P-8B-4S+RM specifically notes that the RBGPOE-CON-HP should be used when powering passive PoE devices in certain configurations.

This makes the converter relevant not only for older infrastructure but also for integrating legacy passive-PoE devices into newer high-voltage PoE networks.

Applications of MikroTik RBGPOE-CON-HP in Kenya

Wireless ISP Networks

WISPs often operate networks built across several generations of MikroTik hardware.

Some radios may accept 24V passive PoE while newer switches provide 48V IEEE PoE.

The RBGPOE-CON-HP helps integrate both technologies.

Point-to-Point Wireless Links

Point-to-point radios can be installed on:

• Rooftops

• Towers

• Schools

• Hotels

• Warehouses

• Farms

• Offices

• CCTV sites

Where the radio accepts 24V but the switch provides 48V, the converter can resolve the voltage mismatch.

Tower Infrastructure

Telecommunications towers commonly use centralized 48V power systems.

The RBGPOE-CON-HP can help power compatible MikroTik devices requiring lower-voltage passive PoE from this type of network infrastructure.

Enterprise Networks

Businesses upgrading to modern 48V PoE switches may still have functional MikroTik equipment that uses 24V passive PoE.

Rather than replacing all endpoints, compatible devices may be retained using the RBGPOE-CON-HP.

Hotels and Campuses

Large hotels, universities and campuses often expand their networks gradually.

This means networking equipment from several generations can coexist.

The converter can help standardize the central power infrastructure while supporting compatible older devices.

CCTV and Surveillance Networking

The RBGPOE-CON-HP may be useful for network equipment supporting surveillance infrastructure, particularly wireless bridge radios connecting remote CCTV locations.

However, it should not automatically be used directly with an IP camera unless the camera specifically accepts 24V passive PoE.

Advantages of MikroTik RBGPOE-CON-HPAdvantageBenefit48V-to-24V ConversionSolves PoE voltage mismatch802.3af SupportCompatible with standard PoE sources802.3at SupportWorks with PoE+Passive PoE InputFlexible power sourcingTelecom PoESuitable for telecom environmentsGigabit EthernetAvoids 100 Mbps bottleneck24W OutputSupports higher-power devicesNo ConfigurationSimple deploymentRouterBOARD CompatibilityDesigned for MikroTik ecosystemEthernet Performance

The RBGPOE-CON-HP is specifically a Gigabit converter.

Ethernet StandardSupported10BASE-TYes100BASE-TXYes1000BASE-TYesMaximum Link Rate1 Gbps

MikroTik's release documentation specifically highlighted 10/100/1000 Mbps support as an improvement compared with its older converter model.

Physical Dimensions

MikroTik publishes an engineering drawing for the RBGPOE-CON-HP showing a compact enclosure approximately 111 mm long, with mounting dimensions provided for professional installations.

Physical CharacteristicDetailsApprox. Overall Length111 mmMounting HolesIncluded in enclosure designInstallation TypeInline/protected installationEthernet ConnectionsTwo

Its compact design allows it to fit within telecom cabinets, equipment enclosures and network rooms.

What to Check Before Buying RBGPOE-CON-HPRequirementWhat to VerifyInput PoE VoltageApproximately 42–57VPowered Device VoltageMust accept 24V / compatible 8–30VDevice Power ConsumptionMust remain within 24WEthernet SpeedGigabit supportedPoE SourcePassive, telecom, af or atCableQuality pure-copper EthernetEnvironmentInstall in protected locationTarget DeviceConfirm exact RouterBOARD modelImportant Voltage Warning

The output of the RBGPOE-CON-HP is 24V passive PoE.

It should therefore not be used to power devices that require:

• 48V-only PoE

• IEEE 802.3af/at negotiation at the endpoint

• More than 24W

• Voltage outside the supported range

For example, a device that specifically requires approximately 48–50V output cannot simply be powered through this converter because the output is reduced to 24V. A recent MikroTik discussion regarding newer PoE switches highlights this distinction.

Who Should Buy the MikroTik RBGPOE-CON-HP?

The converter is particularly suitable for:

• Wireless ISPs

• MikroTik installers

• Network engineers

• Telecom companies

• Enterprise IT teams

• Hotels

• Schools

• Universities

• CCTV integrators

• WISPs

• Tower installers

• Network upgrade projects

It is especially valuable when 48V PoE infrastructure must power compatible 24V RouterBOARD equipment.

Why Buy MikroTik RBGPOE-CON-HP from Mikrotik Kenya?

Genuine MikroTik Equipment

Using a purpose-built MikroTik converter helps ensure predictable integration between higher-voltage PoE sources and compatible RouterBOARD devices.

Voltage Compatibility Assistance

PoE mismatches can damage equipment or prevent devices from powering correctly. Customers can receive assistance identifying:

• Source voltage

• Endpoint voltage

• PoE standard

• Device power consumption

• Ethernet requirements

Professional PoE Network Design

Mikrotik Kenya can assist with:

• ISP towers

• Wireless links

• PoE switches

• RouterBOARD deployments

• Hotel networks

• Enterprise infrastructure

• CCTV backhaul

• Campus networking

Wide MikroTik Product Range

Customers can also source:

• PoE injectors

• Surge protectors

• Access points

• Routers

• Switches

• Wireless radios

• Antennas

• SFP modules

from Mikrotik Kenya.

Frequently Asked Questions About MikroTik RBGPOE-CON-HP

What is the MikroTik RBGPOE-CON-HP?

The RBGPOE-CON-HP is a 48V-to-24V Gigabit PoE converter that allows compatible low-voltage RouterBOARD devices to be powered from high-voltage PoE sources.

What is the RBGPOE-CON-HP price in Kenya?

Current Kenya listings found range from approximately KES 2,000 to around KES 3,961, while MikroTik lists a suggested international price of US$30. Prices should be confirmed before purchase.

What voltage does RBGPOE-CON-HP accept?

MikroTik states that it can be powered by approximately 42–57V PoE sources.

What voltage does it output?

It converts the incoming high-voltage PoE to 24V passive PoE.

How much power can it supply?

It can provide up to 24W, or approximately 1A at 24V.

Does it support Gigabit Ethernet?

Yes. The RBGPOE-CON-HP supports 10/100/1000 Mbps Ethernet.

Does it support 802.3af?

Yes. MikroTik specifically states that IEEE 802.3af PoE sources are supported.

Does it support 802.3at PoE+?

Yes. IEEE 802.3at PoE+ sources are supported.

Does it work with passive PoE?

Yes. High-voltage passive PoE within the supported input range can be used.

Can it work with telecom PoE?

Yes. MikroTik explicitly lists telecom PoE among compatible power sources.

Which MikroTik devices can it power?

It is designed for compatible RouterBOARD equipment that can operate from approximately 8–30V, provided its consumption remains within the converter's limits.

Can it power a 48V-only device?

No. Its output is approximately 24V, so equipment requiring a 48V endpoint supply is not a suitable match.

Can I connect it to a modern PoE switch?

Yes, provided the PoE switch supplies a compatible 42–57V input using passive PoE, 802.3af or 802.3at.

Why would I use this instead of an RBGPOE?

An RBGPOE simply injects the supplied voltage. The RBGPOE-CON-HP actively converts high-voltage PoE to 24V, making it suitable when source and endpoint voltages do not match.

Is RBGPOE-CON-HP an injector?

It is more accurately described as a PoE converter. Power already exists on the incoming Ethernet cable; the unit converts that PoE voltage to a lower level for the target device.

Does it need a separate power adapter?

Normally the input power comes from the incoming PoE Ethernet source, so a separate local DC adapter is not the primary requirement.

Does it need RouterOS configuration?

No. It is a hardware converter and does not require RouterOS configuration.

Is it a managed device?

No. There is no management interface, IP address or configuration dashboard.

Can it power a wireless CPE?

Yes, if the CPE accepts compatible 24V passive PoE and its consumption stays within the 24W limit.

Can it be used with MikroTik outdoor radios?

Yes. This is one of its common applications where compatible MikroTik radios require lower-voltage passive PoE.

Is it suitable for CCTV cameras?

Only if the camera explicitly supports 24V passive PoE. Many IP cameras require 48V IEEE 802.3af/at at the device and therefore should not be powered through this converter.

Is it suitable for ISP towers?

Yes. It can be particularly useful where tower or distribution infrastructure uses centralized 48V PoE but certain radios or RouterBOARD devices require 24V.

Can it help me reuse older MikroTik devices with a new PoE switch?

Yes. This is one of the most useful scenarios for the product: keeping compatible 24V passive-PoE MikroTik devices when upgrading the central network to newer 48V/802.3af/at PoE equipment.

Does MikroTik still reference RBGPOE-CON-HP for new PoE switches?

Yes. Current documentation for MikroTik's CRS320-8P-8B-4S+RM specifically references the RBGPOE-CON-HP when powering passive-PoE devices in certain scenarios.

Where can I buy MikroTik RBGPOE-CON-HP in Kenya?

You can purchase MikroTik PoE converters and receive product-selection assistance through Mikrotik Kenya.

MikroTik RBGPOE-CON-HP Video Guide

Watch the video: MikroTik RBGPOE-CON-HP Networking Guide

The MikroTik RBGPOE-CON-HP solves one of the most common compatibility problems in evolving network infrastructure: the PoE switch and remote device may use different voltage standards. Modern switches often provide approximately 48V through passive PoE, IEEE 802.3af or 802.3at, while many compatible MikroTik RouterBOARD and wireless products are designed around 24V passive PoE. The converter sits between these two systems and changes the higher incoming voltage to a 24V output that the compatible RouterBOARD device can safely use

Its 24W maximum output makes it suitable for more than extremely low-power endpoints. Up to 1A at 24V is available, while the Gigabit Ethernet design ensures that the converter does not intentionally impose an old 100 Mbps limitation on the data path. This makes it especially useful for ISP installations, wireless links and enterprise networks where both power compatibility and high-speed Ethernet are important.

For Kenyan network operators, this type of converter can reduce the need to replace functional MikroTik equipment during infrastructure upgrades. An ISP moving from older 24V power arrangements to centralized 48V PoE switches may still have many compatible radios operating reliably in the field. Using the correct converter can help bridge the two generations of equipment while maintaining Gigabit connectivity. The exact voltage and wattage requirements of every endpoint should still be checked before deployment.

The MikroTik RBGPOE-CON-HP is a specialized yet highly useful 48V-to-24V Gigabit PoE converter for integrating compatible RouterBOARD devices with modern high-voltage PoE infrastructure. It accepts approximately 42–57V from passive PoE, telecom PoE, IEEE 802.3af or 802.3at sources and converts it to 24V passive PoE with up to 24W output.

Its Gigabit Ethernet capability makes it suitable for modern wireless and enterprise networks, while the 24W output provides enough capacity for a broad range of compatible MikroTik equipment. It is especially useful for WISPs, tower operators and enterprises upgrading their central PoE infrastructure while retaining lower-voltage RouterBOARD devices in the field.

Whether you require the RBGPOE-CON-HP for a wireless ISP, point-to-point link, tower installation, RouterBOARD device, enterprise network or 48V-to-24V PoE conversion project, Mikrotik Kenya provides genuine MikroTik networking equipment, PoE accessories, professional compatibility guidance and reliable networking solutions for deployments across Kenya.