G1394-0350WNA

MikroTik G1394-0350WNA Price in Kenya – 350W Hot-Swap Power Supply for CRS804 DDQ

MikroTik G1394-0350WNA Price in Kenya

The MikroTik G1394-0350WNA is a 350W hot-swap power supply designed specifically for the MikroTik CRS804 DDQ switch. It provides 12V DC at up to 27.5A and serves as a direct replacement for the standard AC power modules supplied with the CRS804.

Its hot-swappable design allows a failed PSU to be removed and replaced while the switch continues running from its second power supply. This makes the G1394-0350WNA especially valuable in data centres, AI clusters, enterprise racks, laboratories, storage networks and ISP backbone infrastructure where shutting down a 400G switch for PSU maintenance would be disruptive.

MikroTik currently lists the G1394-0350WNA at an official suggested price of US$119. In Kenya, Senetic recently listed it at approximately KSh 13,983.74 net / KSh 16,221.14 gross, although the unit was shown as out of stock when indexed.

MikroTik G1394-0350WNA Specifications

SpecificationDetailsProduct NameMikroTik G1394-0350WNAProduct CodeG1394-0350WNAProduct TypeHot-swap AC power supplyMain CompatibilityCRS804 DDQDC Output Voltage12V DCOutput Current27.5ARated Output Power350WAC Input100–240V AC, 50/60Hz, up to 8AHot-SwappableYesRedundant Power SupportYesDimensionsApprox. 40 × 50.5 × 220 mmMTBFApprox. 200,000 hours at 25°COfficial Suggested PriceUS$119Primary EnvironmentData centres, enterprise racks, labs, AI and high-speed networking

The official MikroTik product page confirms the 12V DC, 27.5A, 350W rating, CRS804 DDQ compatibility, US$119 suggested price and an MTBF of approximately 200,000 hours at 25°C. (MikroTik)

What Is MikroTik G1394-0350WNA?

The G1394-0350WNA is a removable high-capacity PSU module designed for the MikroTik CRS804-4DDQ-hRM, a compact high-speed switch supporting up to 400G interfaces through QSFP-DD ports. (MikroTik)

The CRS804 comes with two G1394-0350WNA hot-swap AC power supplies, giving the switch built-in PSU redundancy. (MikroTik Help)

A typical configuration is:

AC mains → G1394 PSU 1 + G1394 PSU 2 → CRS804 DDQ

If one supply develops a fault:

PSU 2 keeps CRS804 running → failed PSU removed → replacement G1394 installed

This arrangement allows the administrator to restore full redundancy without shutting down network traffic.

Key Features of MikroTik G1394-0350WNA

1. Powerful 350W Output

The G1394-0350WNA is rated at 350W, making it considerably more powerful than many smaller MikroTik replacement PSUs. (MikroTik)

Its 350W capacity is designed around the requirements of the CRS804 DDQ platform rather than general-purpose MikroTik routers.

2. 12V DC at 27.5A

The PSU provides 12V DC at up to 27.5A. (MikroTik)

The nominal electrical calculation is:

12V × 27.5A = 330W

However, MikroTik officially classifies and publishes the module as a 350W PSU, so buyers should use the manufacturer's 350W specification rather than deriving compatibility solely from voltage-and-current arithmetic. (MikroTik)

3. Hot-Swappable Power Module

One of the most important features is the ability to replace the PSU while the CRS804 remains operational.

MikroTik states that the module can be installed or replaced while the switch is running, allowing operators to restore power redundancy without shutting down the device. (MikroTik)

MikroTik G1394-0350WNA CompatibilityDevice / ApplicationCompatibilityCRS804 DDQOfficially supportedCRS804-4DDQ-hRMExact supported switch platformDual-redundant PSU operationYesData-centre 400G switchingExcellent applicationAI cluster networkingSuitableEnterprise aggregationSuitableStorage networksSuitableISP backbone switchingSuitableCRS812 DDQNot the specified PSUCRS418 seriesNot compatibleStandard home MikroTik routersNot intendedGeneric 12V equipmentNot recommended

MikroTik lists the CRS804 DDQ as the related product for the G1394-0350WNA, while the CRS804 hardware documentation states that the switch ships with two G1394-0350WNA hot-swap IEC AC power supplies. (MikroTik)

4. Designed Specifically for CRS804 DDQ

The G1394-0350WNA was introduced alongside the CRS804 DDQ as its standard AC hot-swap PSU.

The CRS804 combines four high-speed QSFP-DD interfaces supporting speeds up to 400G per interface with redundant hot-swap power and cooling. (MikroTik)

For such a high-throughput switch, maintaining power redundancy is particularly important because a single switch may be carrying enormous amounts of network traffic.

5. Dual PSU Redundancy

The CRS804 is equipped with two G1394-0350WNA power supplies. (MikroTik Help)

Using dual supplies protects the network against a single PSU failure. When one PSU stops working, the other can maintain operation while the defective module is replaced.

This is especially useful for:

• Data centres

• AI computing clusters

• Storage networks

• Enterprise core networks

• ISP backbone networks

• Research laboratories

• High-performance computing environments

6. Standard AC Power Input

Unlike the optional telecom DC supply available for the CRS804, the G1394-0350WNA is designed for standard AC mains installations.

The CRS804 documentation specifies an AC input range of:

100–240V AC, 50/60Hz, maximum 8A. (MikroTik Help)

This makes the G1394 the normal choice where the switch is connected to conventional AC power infrastructure.

7. Alternative to CRS804 Telecom DC PSU

MikroTik also offers the G1382-0350WNA, an optional -48V DC telecom-input hot-swap supply for the CRS804 DDQ. (MikroTik)

This gives network engineers a choice between:

G1394-0350WNA → standard AC power

and

G1382-0350WNA → -48V telecom DC power

The correct option therefore depends primarily on the power infrastructure available at the installation site.

8. High MTBF Rating

MikroTik specifies an MTBF of approximately 200,000 hours at 25°C for the G1394-0350WNA. (MikroTik)

That is a particularly useful specification for a PSU intended for enterprise and data-centre equipment expected to operate continuously.

9. Compact Hot-Swap Cartridge

The PSU measures approximately 40 × 50.5 × 220 mm, according to current distributor specifications. (B&H Photo Video)

Its narrow cartridge design allows two power modules to fit into the compact CRS804 chassis while remaining individually removable.

10. No Software Configuration Required

The G1394-0350WNA is an electrical power module rather than a managed network device.

It has no:

• RouterOS

• SwOS

• IP address

• Ethernet ports

• QSFP-DD ports

• CPU

• WinBox interface

• Wireless radio

• Separate configuration interface

RouterOS runs on the CRS804 switch, not on its PSU.

MikroTik G1394-0350WNA Price in Kenya

Senetic Kenya recently listed the G1394-0350WNA at KSh 13,983.74 net and KSh 16,221.14 gross. The listing currently indicates that the product is out of stock, so availability should be confirmed before ordering. (senetic.co.ke)

Pricing InformationDetailsOfficial MikroTik Suggested PriceUS$119Kenya Net Price ObservedKSh 13,983.74Kenya Gross Price ObservedKSh 16,221.14Current Senetic StatusOut of stock when recently indexedProduct CodeG1394-0350WNARated Power350WOutput12V DC, 27.5ACompatible SwitchCRS804 DDQBuying RecommendationConfirm current Kenya stock and quotation

Because this is a relatively new and specialized replacement PSU for a 400G switch, Kenya availability may vary considerably. Buyers should confirm stock before depending on it for an urgent replacement.

G1394-0350WNA vs G1382-0350WNA vs G1251-0250WNAFeatureG1394-0350WNAG1382-0350WNAG1251-0250WNAMain PlatformCRS804 DDQCRS804 DDQCRS812 DDQPower Class350W350W class250WPower InputStandard AC mains-48V telecom DCAC mainsHost Output12V DC, 27.5ACRS804-specific DC conversion12V DC, 20.8AHot-SwappableYesYesYesRedundancy UseYesYesYesPrimary EnvironmentAC-powered data centresTelecom DC sitesCRS812 deploymentsOfficial Suggested PriceUS$119US$139US$79Interchangeable With G1394?—Different input architectureNo

The most important comparison is between the G1394-0350WNA and G1382-0350WNA. Both are intended for the CRS804 DDQ, but the G1394 is the standard AC-powered module, while the G1382 provides an optional -48V telecom DC input. (MikroTik)

Why Choose MikroTik G1394-0350WNA?

The G1394-0350WNA is an essential spare for organizations operating mission-critical CRS804 DDQ switches. A 400G switch may connect servers, AI clusters, storage systems or network backbone links, so PSU failure should not require shutting down the entire switch.

Keeping a spare G1394-0350WNA on site allows technicians to replace a failed module quickly, restore full redundant power and maintain continuity in demanding environments. (MikroTik)

Frequently Asked Questions About MikroTik G1394-0350WNA

1. What is MikroTik G1394-0350WNA?

The G1394-0350WNA is a 350W hot-swappable power supply designed specifically for the MikroTik CRS804 DDQ switch. (MikroTik)

2. What is the product code?

The official product code is G1394-0350WNA.

3. How much power does it provide?

MikroTik rates the PSU at 350W. (MikroTik)

4. What is its output voltage?

The official product description specifies 12V DC output. (MikroTik)

5. What is its output current?

The published current rating is 27.5A. (MikroTik)

6. What AC input does it support?

The CRS804 hardware documentation specifies 100–240V AC at 50/60Hz, up to 8A for its G1394 hot-swap supplies. (MikroTik Help)

7. What is the official MikroTik price?

MikroTik currently lists the G1394-0350WNA at US$119. (MikroTik)

8. What is MikroTik G1394-0350WNA price in Kenya?

A recent Senetic Kenya listing shows approximately KSh 13,983.74 net or KSh 16,221.14 gross. (senetic.co.ke)

9. Is the G1394-0350WNA currently available in Kenya?

The Senetic Kenya listing was showing out of stock when recently indexed. Availability may change, so current stock should be confirmed before ordering. (senetic.co.ke)

10. Which MikroTik switch uses G1394-0350WNA?

It is designed for the MikroTik CRS804 DDQ, specifically the CRS804-4DDQ-hRM platform. (MikroTik)

11. How many G1394 power supplies does the CRS804 have?

The CRS804 is equipped with two G1394-0350WNA hot-swap AC power supplies. (MikroTik Help)

12. Is G1394-0350WNA hot-swappable?

Yes. MikroTik specifically describes it as a hot-swap power supply. (MikroTik)

13. What does hot-swappable mean?

It means a PSU can be removed and replaced while the CRS804 remains switched on, provided another working power supply continues to power the switch.

14. Do I need to restart the CRS804 when changing the PSU?

Normally no. MikroTik states that the G1394 module can be replaced while the switch is running. (MikroTik)

15. Will network traffic stop when replacing one PSU?

Not if the CRS804 is operating correctly from its second functioning supply. The dual-PSU architecture is specifically intended to preserve operation during a single PSU replacement.

16. Does hot swapping guarantee uninterrupted service?

Only when another functioning power source remains available. If both power supplies fail or are removed, the switch will lose power.

17. Can G1394-0350WNA be used as a spare PSU?

Yes. Keeping one available is particularly useful for critical CRS804 installations because it allows full PSU redundancy to be restored quickly following a failure.

18. What is the difference between G1394-0350WNA and G1382-0350WNA?

Both are designed for the CRS804 DDQ, but they serve different power infrastructures. The G1394 is the standard AC mains PSU, while the G1382 is an optional -48V telecom DC-input PSU. (MikroTik)

19. Can I replace G1394 with G1382?

The G1382 is officially offered as an optional CRS804 power module, but it uses a different incoming power architecture. Installation must therefore match the site's -48V DC telecom power system. (MikroTik)

20. Is G1394-0350WNA compatible with CRS812 DDQ?

No documented compatibility exists. The CRS812 DDQ uses the G1251-0250WNA replacement PSU rather than the G1394. (MikroTik)

21. Can it be used with CRS418?

No. The CRS418 family uses a different PSU architecture.

22. Can it power an ordinary 12V device?

It should not be treated as a generic external 12V PSU. The module is specifically designed mechanically and electrically for the CRS804 DDQ.

23. Does it run RouterOS?

No. RouterOS runs on the CRS804 switch. The PSU itself is an electrical power module.

24. Can I manage the G1394 through WinBox?

No. It has no independent network-management interface.

25. What is the MTBF of G1394-0350WNA?

MikroTik specifies an MTBF of approximately 200,000 hours at 25°C. (MikroTik)

26. What are its dimensions?

Current distributor specifications list approximately 40 × 50.5 × 220 mm. (B&H Photo Video)

27. Is it suitable for data centres?

Yes. MikroTik specifically identifies data centres, enterprise racks and labs among the intended environments for this PSU. (MikroTik)

28. Is it suitable for AI networks?

Yes. The CRS804 itself is positioned for high-bandwidth environments such as AI clusters, and redundant hot-swap power is particularly useful where continuous availability is important. (MikroTik)

29. Is professional replacement recommended?

Yes. Even though the module is hot-swappable, technicians should verify which PSU has failed and confirm that the second module is operating normally before removing anything from a live production switch.

30. Where can I buy MikroTik G1394-0350WNA in Kenya?

The PSU can be sourced through specialist MikroTik networking suppliers in Kenya. When requesting a quotation, specify the complete G1394-0350WNA product code and CRS804 DDQ compatibility to avoid confusion with the G1382 telecom DC alternative.

Replacing the MikroTik G1394-0350WNA

Before replacing a failed module, confirm that the second CRS804 PSU is functioning correctly and that the switch remains stable. The dual hot-swap architecture allows one module to be serviced while the other continues supplying power. (MikroTik Help)

The faulty G1394-0350WNA can then be released from its PSU bay and replaced with the new module while the CRS804 continues operating. MikroTik specifically designed the module for replacement without shutting down the switch. (MikroTik)

After installing the replacement, verify that both PSU modules are functioning correctly so that full power redundancy is restored. For critical data-centre and ISP installations, keeping at least one replacement G1394-0350WNA in stock can substantially reduce recovery time.

The MikroTik G1394-0350WNA is a 350W, 12V DC, 27.5A hot-swap AC power supply created specifically for the CRS804 DDQ. Its ability to be replaced while the switch continues running helps maintain availability in high-performance networking environments.

With dual G1394 power supplies built into the CRS804, the platform provides redundant AC power suitable for data centres, ISP cores, AI clusters, storage networks, research environments and enterprise backbone installations. Its approximately 200,000-hour MTBF at 25°C further reflects its role in demanding infrastructure.

The official MikroTik suggested price is US$119, while the recent Kenya listing was approximately KSh 16,221 gross, although stock was unavailable at the time of checking. (MikroTik) For the latest G1394-0350WNA price in Kenya, current stock and genuine MikroTik networking accessories, visit MikroTik Kenya.