12POW150 – KES

MikroTik 12POW150 Price in Kenya – 12V 150W Hot-Swap Power Supply

MikroTik 12POW150 Price in Kenya

The MikroTik 12POW150 is a 12V 150W hot-swap AC/DC power supply designed for selected MikroTik high-performance routers and switches. MikroTik currently lists it for CCR1072-1G-8S+, CCR2216-1G-12XS-2XQ, CRS518-16XS-2XQ-RM and CRS520-4XS-16XQ-RM. (MikroTik)

Its main advantage is power redundancy. Compatible devices use two hot-swappable power supplies, so if one PSU fails, the second can continue powering the unit. The failed 12POW150 can then be replaced without restarting the router or switch, helping maintain uninterrupted network operation. (MikroTik)

MikroTik's official suggested price is US$100. In Kenya, Senetic currently lists the 12POW150 at KSh 11,380.04 net and KSh 13,200.85 gross, with 11–20 units shown available when recently indexed. (MikroTik)

MikroTik 12POW150 Specifications

SpecificationDetailsProduct NameMikroTik 12POW150Product Code12POW150Product TypeHot-swap AC/DC power supplyDC Output12VRated Power150WHot-SwappableYesRedundant Power SupportYes, on compatible devicesPrimary CompatibilityCCR1072, CCR2216, CRS518, CRS520Restart Required During ReplacementNo, when another PSU remains operationalRouterOS ConfigurationNot requiredOfficial Suggested PriceUS$100Kenya Gross Price ObservedApprox. KSh 13,200.85

MikroTik describes the 12POW150 as a 12V 150W AC/DC hot-swap supply and specifically highlights zero-downtime PSU replacement. (MikroTik)

What Is MikroTik 12POW150?

The 12POW150 is a modular replacement power supply for selected MikroTik carrier-grade routers and switches.

A typical redundant setup works as follows:

AC power → PSU 1 + PSU 2 → MikroTik router or switch

If PSU 1 fails:

PSU 2 keeps the device powered → PSU 1 can be removed → replacement 12POW150 installed

This is particularly valuable in networks where even a short restart could interrupt customers, servers, routing sessions or backbone connectivity.

Key Features of MikroTik 12POW150

1. 150W Power Capacity

The 12POW150 is rated at 150W, providing the power required by compatible MikroTik high-performance systems. (MikroTik)

It is specifically designed for the host devices listed by MikroTik rather than being a generic 12V replacement supply.

2. 12V DC Output

MikroTik specifies the unit as a 12V 150W AC/DC supply. (download2.mikrotik.com)

Its internal connector and mechanical design are matched to supported MikroTik equipment, so voltage alone should never be used to determine compatibility.

3. Hot-Swap Design

The most important feature is hot swapping.

MikroTik states that the PSU can be replaced while the router or switch remains operational, provided the redundant PSU is still functioning. No router restart is required. (MikroTik)

MikroTik 12POW150 CompatibilityDeviceCompatibilityCCR1072-1G-8S+Officially supportedCCR2216-1G-12XS-2XQOfficially supportedCRS518-16XS-2XQ-RMOfficially supportedCRS520-4XS-16XQ-RMOfficially listed as relatedDual-PSU installationsDesigned for redundancyGeneric 12V equipmentNot intendedCRS418Uses another PSU platformCRS812 DDQUses G1251-series PSUsStandard home routersNot suitable

MikroTik's current product page lists all four platforms above as related products for the 12POW150. (MikroTik)

4. Designed for CCR1072

The 12POW150 was originally introduced as a spare hot-swap PSU for the CCR1072-1G-8S+.

The CCR1072 uses two redundant 150W supplies. If one fails, the second takes over, allowing the failed supply to be replaced without taking the router offline. (download2.mikrotik.com)

5. Compatible with CCR2216

MikroTik now also lists CCR2216-1G-12XS-2XQ as a compatible platform. (MikroTik)

This makes the 12POW150 particularly relevant to ISP backbone, enterprise core and data-centre routing installations using MikroTik's high-performance CCR2216.

6. Compatible with CRS518

The CRS518-16XS-2XQ-RM also uses the 12POW150 hot-swap power architecture. (MikroTik)

For fibre aggregation networks, redundant supplies can help avoid losing multiple downstream links due to a single PSU failure.

7. Related to CRS520

MikroTik's current product page additionally lists the CRS520-4XS-16XQ-RM as a related product for the 12POW150. (MikroTik)

For new deployments, always confirm the exact PSU configuration of the specific CRS520 hardware revision before ordering spares.

8. Built for Redundant Power

High-availability systems commonly use two PSU modules rather than relying on one.

The second PSU provides protection against a single power-module failure. This is particularly useful for:

• ISP core routers

• Internet exchange infrastructure

• Data centres

• Fibre aggregation

• Enterprise backbone networks

• Telecom networks

• Hosting environments

9. No Configuration Required

The 12POW150 is an electrical component, not a managed networking device.

It does not have RouterOS, an IP address, Ethernet ports, WinBox configuration or separate firmware management.

MikroTik 12POW150 Price in Kenya

Senetic Kenya currently lists the MikroTik 12POW150 at KSh 11,380.04 net and KSh 13,200.85 gross. The listing recently showed 11–20 units available. (senetic.co.ke)

Pricing InformationDetailsOfficial MikroTik Suggested PriceUS$100Kenya Net Price ObservedKSh 11,380.04Kenya Gross Price ObservedKSh 13,200.85Recent Availability11–20 unitsProduct Code12POW150Rated Power150WOutput Voltage12VTypeHot-swap replacement PSU

Local prices can change because of exchange rates, VAT and stock availability, so the current quotation should be confirmed before purchase.

12POW150 vs Other MikroTik Hot-Swap Power SuppliesFeature12POW150PW48V-12V150WG1251-0250WNAG1040A-60WFOutput / Type12V AC/DC PSU-48V telecom DC input PSU12V PSUHot-swap PSURated Power150W150W250W60WHot-SwapYesYesYesYesMain PlatformsCCR1072 / CCR2216 / CRS518CCR1072 / CCR2216 / CRS518CRS812 DDQCCR2004 / CRS504 / CRS510AC Mains VersionYesNo, telecom DCYesYesMain AdvantageStandard redundant AC power-48V telecom integrationHigher CRS812 powerCompact 60W replacementOfficial Suggested PriceUS$100US$100US$79US$49

MikroTik currently lists both 12POW150 and PW48V-12V150W at US$100, while the G1251-0250WNA is US$79. (MikroTik)

Frequently Asked Questions About MikroTik 12POW150

What is MikroTik 12POW150?

It is a 12V 150W AC/DC hot-swappable power supply designed for selected MikroTik CCR and CRS devices. (MikroTik)

What is the product code?

The product code is 12POW150.

How much power does it provide?

It is rated at 150W. (MikroTik)

What voltage does it output?

It provides 12V DC internally to the compatible MikroTik device. (download2.mikrotik.com)

Is 12POW150 hot-swappable?

Yes. Hot swapping is one of its main features. (MikroTik)

What does hot-swap mean?

It means a failed PSU can be removed and replaced while the host router or switch continues operating from another functioning redundant PSU.

Does the router need to restart when replacing it?

No, provided the second PSU remains operational. MikroTik specifically states that replacement can be performed without restarting the router. (MikroTik)

What is the official MikroTik price?

The official suggested price is US$100. (MikroTik)

What is the 12POW150 price in Kenya?

The current Senetic Kenya listing is approximately KSh 13,200.85 gross. (senetic.co.ke)

What is the price before VAT?

Senetic currently lists approximately KSh 11,380.04 net. (senetic.co.ke)

Is 12POW150 available in Kenya?

Senetic's current listing recently showed 11–20 units available, although stock can change. (senetic.co.ke)

Is it compatible with CCR1072-1G-8S+?

Yes. This was the original primary platform for the 12POW150. (download2.mikrotik.com)

Is it compatible with CCR2216-1G-12XS-2XQ?

Yes. MikroTik currently lists CCR2216 as a supported related product. (MikroTik)

Can I use it with CRS518-16XS-2XQ-RM?

Yes. CRS518 is officially listed as compatible. (MikroTik)

Does it work with CRS520-4XS-16XQ-RM?

MikroTik's current page lists CRS520-4XS-16XQ-RM as a related product for the 12POW150. (MikroTik)

Can I use it with CRS812?

No. CRS812 DDQ uses the G1251-series hot-swap PSU architecture rather than 12POW150. (MikroTik)

Can I use it with CRS418?

No direct compatibility is documented. The CRS418 family uses a different PSU architecture.

Is 12POW150 a normal external adapter?

No. It is a removable hot-swap PSU module designed to fit specific MikroTik devices.

Can I use it to power a generic 12V device?

It is not intended as a general-purpose 12V power supply. Mechanical fit, electrical connector design and host communication requirements must also match.

Does it support redundant power?

Yes. Redundancy is one of the central reasons this PSU exists. (MikroTik)

How does redundant power work?

Compatible MikroTik hardware contains two PSU modules. Either supply can take over if the other fails, helping keep the device online.

What happens if one PSU fails?

The second PSU continues powering the router or switch, and the failed module can be replaced while the device is still running. (MikroTik)

Does hot swapping guarantee zero downtime?

It is designed to enable zero-downtime PSU replacement when another functioning supply is already powering the device. If no other working power source exists, the device cannot remain operational.

Can both power supplies operate simultaneously?

Compatible devices are designed to use dual power supplies for redundancy.

Should I keep a spare 12POW150?

For mission-critical networks, keeping a spare can significantly reduce the time needed to restore full PSU redundancy after a failure.

Is it useful for ISPs?

Yes. The CCR1072 and CCR2216 are high-performance routing platforms, making redundant power especially valuable in ISP core and backbone environments.

Is it useful in data centres?

Yes. Hot-swappable redundant PSUs are particularly beneficial where service interruption must be minimized.

Is it suitable for fibre aggregation?

Yes, particularly when used in compatible CRS518 or CRS520 switching deployments.

Does the PSU have RouterOS?

No.

Does it have an IP address?

No.

Can it be configured with WinBox?

No.

Does it contain Ethernet ports?

No.

Does it need firmware updates?

No separate configuration or firmware management is required for the PSU itself.

What is the difference between 12POW150 and PW48V-12V150W?

Both target similar high-end MikroTik platforms and provide hot-swap redundancy, but 12POW150 is the standard AC/DC supply, while PW48V-12V150W is intended for -48V telecom DC infrastructure. (MikroTik)

Which PSU should a normal AC-powered installation use?

For compatible equipment connected to conventional AC mains, the 12POW150 is the relevant option. The PW48V model is designed for telecom DC installations.

Can I replace 12POW150 with G1251-0250WNA?

No. Even though both are hot-swap PSUs, they are designed for different MikroTik platforms and have different capacities.

Is 12POW150 more powerful than G1251-0250WNA?

No. The G1251-0250WNA is rated at 250W, while 12POW150 is rated at 150W. (MikroTik)

Can I remove it while the router is running?

Yes, but only as part of a properly functioning redundant PSU setup. Verify that the second PSU is supplying power before removing a module.

Is professional replacement recommended?

Yes. Although it is built for hot-swap servicing, technicians should still follow electrical safety and ESD procedures and verify which PSU has failed before removal.

Where can I buy MikroTik 12POW150 in Kenya?

The 12POW150 can be sourced through MikroTik networking suppliers in Kenya. Always specify the full 12POW150 part number and confirm the exact CCR or CRS model before ordering.

Replacing the MikroTik 12POW150

Before replacing a failed PSU, confirm that the second redundant power supply is functioning and that the router or switch remains stable. Once redundancy is verified, the failed 12POW150 can be released and removed from its PSU bay.

Install the replacement PSU securely into the same slot and confirm that it is supplying power correctly. MikroTik's hot-swap design means the router or switch does not need to be restarted during this procedure when the other PSU remains operational.

For ISP cores, data centres and other critical networks, it is advisable to keep a spare 12POW150 available so a failed module can be replaced quickly and full redundancy restored.

The MikroTik 12POW150 is a 12V 150W hot-swap AC/DC power supply designed for high-performance MikroTik equipment including CCR1072, CCR2216, CRS518 and CRS520. Its redundant architecture allows a failed PSU to be replaced without restarting the host device when another working PSU is present.

This makes it particularly suitable for ISPs, data centres, enterprise core networks and fibre aggregation environments where uptime is critical. Its hot-swap design helps technicians restore full power redundancy with minimal disruption.

The current Kenya listing is approximately KSh 13,200.85 gross, while MikroTik's official suggested price is US$100. (MikroTik) For current stock, quotations and genuine MikroTik power accessories, visit MikroTik Kenya.