PW48V-12V150W

MikroTik PW48V-12V150W Price in Kenya – Hot-Swap -48V DC Telecom Power Supply

MikroTik PW48V-12V150W Price in Kenya

The MikroTik PW48V-12V150W is a 150W hot-swappable DC telecom power supply designed for selected MikroTik carrier-grade routers and high-capacity switches. It accepts a telecom DC input range of approximately -36V to -57V and converts it internally to 12V DC at up to 12.5A for compatible MikroTik equipment.

The PSU is intended for environments that use -48V telecom DC power, which is common in ISP, mobile-network, data-centre and telecommunications installations. MikroTik currently lists compatibility with the CCR1072-1G-8S+, CCR2216-1G-12XS-2XQ, CRS518-16XS-2XQ-RM and CRS520-4XS-16XQ-RM.

One of its most important features is hot-swap replacement. On a compatible device with redundant power, one supply can continue operating while the other is removed and replaced, allowing maintenance without switching off the router or switch. MikroTik's current suggested price is US$100, while a current Kenya listing shows approximately KSh 16,928.70 net / KSh 19,637.29 gross.

MikroTik PW48V-12V150W Specifications

SpecificationDetailsProduct NameMikroTik PW48V-12V150WProduct CodePW48V-12V150WProduct TypeHot-swap telecom DC power supplyInput TypeDC telecom powerSupported Input Voltage-36V to -57V DCPublished Input CurrentUp to 5AInternal Output Voltage12V DCOutput Current12.5ARated Power150WHot-SwappableYesMain PlatformsCCR1072, CCR2216, CRS518, CRS520MTBFApprox. 100,000 hours at 25°CCertificationCE, RoHSOfficial Suggested PriceUS$100

The electrical label shown in MikroTik material identifies the PSU as a 150W unit with 12V, 12.5A DC output, while the current product page confirms the -36V to -57V supported telecom input range. (mum.mikrotik.com)

What Is MikroTik PW48V-12V150W?

The PW48V-12V150W is a specialist power-supply module for MikroTik hardware installed in -48V DC telecom environments.

Instead of using ordinary AC mains directly, a typical deployment works as:

-48V telecom DC system → PW48V-12V150W → MikroTik CCR/CRS internal 12V power rail

This architecture is particularly useful where routers and switches are installed alongside telecom rectifiers, battery banks and DC power-distribution systems.

Key Features of MikroTik PW48V-12V150W

1. Designed for -48V Telecom Power Systems

The PW48V-12V150W accepts a broad telecom DC input range of -36V to -57V. (MikroTik)

This makes it suitable for network sites where equipment is powered from centralized DC infrastructure rather than conventional AC wall sockets.

Typical environments include:

• ISP core sites

• Telecommunications rooms

• Mobile-network facilities

• Data centres

• Internet exchange facilities

• Fibre aggregation sites

• Battery-backed DC installations

2. 150W Rated Power

The PSU is rated at 150W, giving it sufficient capacity for the MikroTik platforms it is designed to support. The published internal output is 12V at 12.5A, which equals 150W nominally. (mum.mikrotik.com)

3. Hot-Swap Replacement

The PW48V-12V150W is hot-swappable.

MikroTik states that operators can remove one of the existing compatible power supplies and replace it with the PW48V-12V150W without turning off the device. (MikroTik)

That is especially important for critical routing and switching infrastructure where a reboot could disrupt customers or backbone connectivity.

MikroTik PW48V-12V150W CompatibilityMikroTik DeviceCompatibilityCCR1072-1G-8S+Officially supportedCCR2216-1G-12XS-2XQOfficially supportedCRS518-16XS-2XQ-RMOfficially supportedCRS520-4XS-16XQ-RMOfficially supportedRedundant -48V DC deploymentsPrimary intended useStandard AC-only installationsUse the appropriate AC PSU insteadCRS812 DDQUses another PSU familyCRS418 seriesUses another PSU familyHome MikroTik routersNot intendedGeneric 12V equipmentNot intended as a universal PSU

MikroTik's current product page directly lists the CCR1072, CCR2216, CRS518 and CRS520 as related products for this supply. (MikroTik)

4. Compatible with CCR1072

The PW48V-12V150W was originally introduced for the CCR1072-1G-8S+, providing telecom operators with a direct -48V DC powering option.

This makes it particularly useful where the CCR1072 is deployed in a telecom rack already backed by DC battery systems.

5. Compatible with CCR2216

MikroTik's current flagship-class CCR2216-1G-12XS-2XQ is also officially supported. (MikroTik)

The combination is especially relevant in ISP backbone and high-throughput routing installations that already operate from telecom DC infrastructure.

6. Compatible with CRS518

The CRS518-16XS-2XQ-RM is another supported device.

This high-capacity fibre switch can therefore be integrated into a -48V DC environment without relying solely on conventional AC power supplies. (MikroTik)

7. Compatible with CRS520

MikroTik also confirms that the CRS520-4XS-16XQ-RM can be powered using the PW48V-12V150W.

The CRS520 comes with two hot-swap power supplies and can optionally use the PW48V-12V150W for telecom DC installations. (MikroTik)

8. Useful for Redundant Power Designs

A major reason to use the PW48V-12V150W is to improve power flexibility and redundancy.

Depending on the supported host device, operators can design power arrangements using separate power feeds so that failure of one power source does not necessarily interrupt service.

This is valuable for:

• ISP backbone routers

• Data-centre switching

• Enterprise core networks

• Telecom exchanges

• Fibre aggregation

• Carrier networks

9. Suitable for Battery-Backed Telecom Systems

Traditional -48V telecom systems often use centralized rectifiers together with large battery banks.

The PW48V-12V150W allows supported MikroTik equipment to integrate directly into that architecture, potentially avoiding the unnecessary conversion path of:

DC battery → inverter → AC → router PSU

Instead, the telecom DC supply feeds the MikroTik DC PSU directly.

10. No Network Configuration Required

The PW48V-12V150W is a power module only.

It does not have:

• RouterOS

• SwOS

• IP address

• Ethernet interfaces

• SFP ports

• CPU

• WinBox

• Web interface

• Separate firmware configuration

Once correctly installed and powered, it performs its DC-to-DC conversion automatically.

MikroTik PW48V-12V150W Price in Kenya

A current Senetic Kenya listing shows the PW48V-12V150W at approximately KSh 16,928.70 net and KSh 19,637.29 gross, with 3 units shown available when recently indexed. MikroTik's current official suggested price remains US$100. (senetic.co.ke)

Pricing InformationDetailsOfficial MikroTik Suggested PriceUS$100Kenya Net Price ObservedKSh 16,928.70Kenya Gross Price ObservedKSh 19,637.29Recent Kenya Availability3 unitsProduct CodePW48V-12V150WInput-36V to -57V DCOutput12V, 12.5ARated Power150W

Kenya prices can change depending on exchange rates, VAT and supplier stock, so the current quotation should always be confirmed before purchase.

PW48V-12V150W vs 12POW150 vs PW48V-12V85WFeaturePW48V-12V150W12POW150PW48V-12V85WRated Power150W150WApprox. 85W classHost Output12V, 12.5A12V internal12V, 7AInput Type-48V telecom DCAC mains±48V / telecom DCInput Range-36V to -57VAC supply36V to 57V differentialHot-SwapYesYesInternal replacement, not the same hot-swap formatCCR1072 SupportYesYesNoCCR2216 SupportYesYesCCR2116 insteadCRS518 SupportYesYesNoCRS520 SupportYesYesNoMain PurposeTelecom DC deploymentStandard AC deploymentSmaller CCR/CRS telecom conversionOfficial Suggested PriceUS$100US$100US$49

The main difference between the PW48V-12V150W and 12POW150 is the power source. Both are 150W hot-swap options for several of the same high-end MikroTik devices, but the PW48V model is designed for -48V DC telecom infrastructure, whereas 12POW150 is the conventional AC-powered option. (MikroTik)

Why Choose MikroTik PW48V-12V150W?

The PW48V-12V150W is a strong choice for operators already using -48V DC infrastructure and needing compatible MikroTik core routers or switches to integrate directly into that power system.

Its main advantages include hot-swap replacement, 150W capacity, support for a broad -36V to -57V input range, compatibility with high-end CCR and CRS devices, and the ability to work within redundant telecom power environments. (MikroTik)

Frequently Asked Questions About MikroTik PW48V-12V150W

What is MikroTik PW48V-12V150W?

The PW48V-12V150W is a hot-swappable -48V DC telecom power supply designed for selected MikroTik CCR and CRS devices. (MikroTik)

What is the product code?

The official product code is PW48V-12V150W.

How much power does it provide?

It is rated at 150W. (mum.mikrotik.com)

What voltage does it accept?

MikroTik specifies an input range of approximately -36V to -57V DC. (MikroTik)

What is its output voltage?

The PSU's internal output is 12V DC. (mum.mikrotik.com)

What is its output current?

The published output current is 12.5A. (mum.mikrotik.com)

How does 12V 12.5A equal 150W?

Nominally:

12V × 12.5A = 150W.

What input current is published?

MikroTik product-label material shows a maximum input-current figure of 5A for the telecom DC side. (mum.mikrotik.com)

What is the official MikroTik price?

MikroTik currently lists the PSU at US$100. (MikroTik)

What is PW48V-12V150W price in Kenya?

A current Kenya listing shows approximately KSh 19,637.29 gross, or KSh 16,928.70 net. (senetic.co.ke)

Is PW48V-12V150W available in Kenya?

The current Senetic Kenya listing recently showed 3 units available, although stock can change. (senetic.co.ke)

Is it compatible with CCR1072?

Yes. The CCR1072-1G-8S+ is officially listed as compatible. (MikroTik)

Does it work with CCR2216?

Yes. MikroTik lists the CCR2216-1G-12XS-2XQ among supported related products. (MikroTik)

Can it be used with CRS518?

Yes. The CRS518-16XS-2XQ-RM is officially supported. (MikroTik)

Does it work with CRS520?

Yes. MikroTik explicitly states that CRS520-4XS-16XQ-RM can use the PW48V-12V150W. (MikroTik)

Is the PW48V-12V150W hot-swappable?

Yes. Hot swapping is a primary feature. (MikroTik)

What does hot-swap mean?

It means the power supply can be removed and replaced while the host device remains operational from another functioning PSU.

Do I have to turn the router off before replacing it?

Not when the compatible device has another functioning power supply maintaining power. MikroTik specifically says you do not need to turn off the device during replacement. (MikroTik)

Does hot swapping guarantee zero downtime?

It enables zero-downtime PSU replacement when another working power source remains available. If the unit loses every active power source, it will still shut down.

What is -48V telecom power?

It is a DC power architecture widely used in telecommunications equipment, network exchanges and other carrier infrastructure.

Why do telecom networks use negative 48V?

The convention comes from long-established telecom power practices. For this PSU, the practical requirement is to follow MikroTik's documented input polarity and supported -36V to -57V range.

Can I connect it to a normal wall socket?

No. The PW48V-12V150W is not a normal AC mains PSU. It requires a compatible telecom DC power source.

What should I use if I only have AC mains?

For compatible platforms, the standard 12POW150 is the AC-powered hot-swap alternative.

What is the difference between PW48V-12V150W and 12POW150?

The main distinction is input power:

PW48V-12V150W: -48V telecom DC input
12POW150: conventional AC-powered PSU.

Both are 150W hot-swap supplies for several of the same MikroTik platforms. (MikroTik)

Is PW48V-12V150W the same as PW48V-12V85W?

No.

The PW48V-12V150W is a 150W hot-swap module for CCR1072, CCR2216, CRS518 and CRS520.

The PW48V-12V85W is a smaller approximately 85W-class internal telecom PSU intended for a different set of CCR and CRS devices. (MikroTik)

Can PW48V-12V85W replace PW48V-12V150W?

No. They have different output capacities, physical designs and compatible device families.

Does it provide PoE?

No. The PSU does not itself provide Ethernet PoE.

Does it have Ethernet ports?

No.

Does it run RouterOS?

No.

Does it have an IP address?

No.

Can I manage it through WinBox?

No.

Does it require firmware updates?

No separate firmware or configuration is required for the PSU itself.

Can I use it as a generic 12V 150W supply?

It is not intended as a general-purpose external 12V power supply. It is designed around the electrical connector, mechanical dimensions and hot-swap architecture of supported MikroTik equipment.

Can it be used with CRS418?

No documented compatibility exists. CRS418 uses a different replacement PSU architecture.

Can it be used with CRS812 DDQ?

No. CRS812 uses the G1251-series hot-swap supply family.

Is it useful for ISP networks?

Yes. Its supported CCR and CRS platforms are intended for high-capacity routing and switching, while -48V telecom infrastructure is common in professional ISP facilities.

Is it suitable for data centres?

Yes, particularly in data centres or telecom facilities that already distribute -48V DC power.

Can it work with battery backup?

Yes, when installed within a correctly designed -48V DC telecom battery system whose voltage remains within the supported input range.

Why is direct DC useful in telecom installations?

A DC-based architecture can allow the router or switch to operate directly from centralized rectifier and battery infrastructure without first converting stored DC power to AC and then back to DC.

Should I keep a spare PW48V-12V150W?

For mission-critical equipment, a spare PSU can reduce the time needed to restore full redundancy after a module failure.

What is the MTBF?

MikroTik specifies approximately 100,000 hours at 25°C. (MikroTik)

What certifications does it have?

MikroTik currently lists CE and RoHS approvals. (MikroTik)

Is professional installation recommended?

Yes. Telecom DC systems can supply substantial current, and polarity, protection and wiring must be correct. Installation should be performed by personnel familiar with DC telecom power systems.

Where can I buy MikroTik PW48V-12V150W in Kenya?

The unit can be sourced through specialist MikroTik networking suppliers in Kenya. Use the exact PW48V-12V150W product code when requesting a quotation to avoid confusing it with the smaller PW48V-12V85W.

Installing MikroTik PW48V-12V150W

Before installation, verify that the host device is one of the supported MikroTik models and that the site's DC supply is within the specified -36V to -57V range. Correct telecom DC polarity and circuit protection are essential.

For a redundant system, first confirm that another PSU is actively powering the MikroTik router or switch. The existing module can then be removed from its PSU bay and replaced with the PW48V-12V150W without shutting down the device. This is the primary advantage of its hot-swap design.

After installation, verify the host device's power status and confirm that full redundancy has been restored. For ISP cores, data centres and telecom facilities, keeping a spare module on site can further reduce the impact of future PSU failures.

The MikroTik PW48V-12V150W is a specialist 150W hot-swap -48V DC telecom power supply for high-performance MikroTik networking platforms. It supports an input range of -36V to -57V DC and provides 12V at up to 12.5A internally.

Its compatibility with CCR1072, CCR2216, CRS518 and CRS520, together with its hot-swap capability, makes it particularly suitable for ISP backbone, telecom and data-centre environments where redundant DC power and minimal downtime are important.

The official suggested price is US$100, while a current Kenya listing is approximately KSh 19,637 gross. (senetic.co.ke) For current stock, quotations and genuine MikroTik telecom power accessories, visit MikroTik Kenya.