MTP250-26V94-OD

MikroTik MTP250-26V94-OD Price in Kenya – Outdoor 26V 250W AC/DC Power Supply

MikroTik MTP250-26V94-OD Price in Kenya

The MikroTik MTP250-26V94-OD is a rugged outdoor AC/DC power supply designed for MikroTik's netPower product line and compatible 18–30V equipment. MikroTik markets it as a 26V 250W supply, while the current hardware manual specifies an actual maximum output of 26V DC, 9.4A and 244W. (MikroTik)

Its IP67 enclosure, pole/wall mounting capability and tested operating range of -40°C to +70°C make it particularly useful for outdoor ISP, WISP, CCTV, Wi-Fi and campus-network installations. MikroTik specifically recommends checking the DC-input voltage of the equipment before choosing between this 26V model and the higher-voltage MTP250-53V47-OD. (MikroTik)

MikroTik currently lists the MTP250-26V94-OD at an official suggested price of US$99. Senetic Kenya currently lists the unit at approximately KSh 11,380.04 net / KSh 13,200.85 gross, with five units shown available when recently indexed. (MikroTik)

MikroTik MTP250-26V94-OD Specifications

SpecificationDetailsProduct NameMikroTik MTP250-26V94-ODProduct CodeMTP250-26V94-ODProduct TypeOutdoor AC/DC power supplyAC Input100–240V AC, 50/60HzDC Output Voltage26VDC Output Current9.4AMaximum DC Output Power244WMarketed Power Class250WIP RatingIP67MountingPole or wallTested Temperature-40°C to +70°CMTBFApprox. 100,000 hours at 25°CCertificationsCE, EAC, RoHSOfficial Suggested PriceUS$99

The distinction between 244W maximum output and the 250W product class is worth noting. MikroTik's current manual publishes 26V × 9.4A = approximately 244W, while the commercial product description calls it a 250W-class supply. (MikroTik Manual)

What Is MikroTik MTP250-26V94-OD?

The MTP250-26V94-OD converts normal AC mains into a high-current 26V DC supply for compatible MikroTik outdoor networking equipment.

A typical installation looks like:

100–240V AC → MTP250-26V94-OD → MikroTik outdoor router/switch → PoE devices

It does not carry Ethernet traffic or negotiate PoE itself. Instead, it supplies electrical power to a compatible MikroTik device such as a netPower switch, which then handles Ethernet and PoE distribution.

Key Features of MikroTik MTP250-26V94-OD

1. 26V DC Output

The unit provides a regulated 26V DC output, positioning it within the voltage range used by many MikroTik products designed for approximately 18–30V DC input. (MikroTik Manual)

MikroTik gives an example where home access points designed for 12–30V input are powered using the MTP250-26V94-OD through compatible networking equipment. (MikroTik)

2. High 9.4A Output Current

The PSU can supply up to 9.4A, giving it considerably more current capacity than a typical MikroTik desktop power adapter.

At its published rating:

26V × 9.4A = approximately 244W

This makes it useful where one outdoor device must support several PoE-connected endpoints.

3. IP67 Outdoor Protection

The MTP250-26V94-OD carries an IP67 rating, meaning its enclosure is designed to provide strong protection against dust and water ingress when installed correctly. (MikroTik)

That makes it suitable for exposed environments such as towers, poles, perimeter CCTV systems and outdoor network distribution points.

MikroTik MTP250-26V94-OD CompatibilityDevice / ApplicationCompatibility / UsenetPower 16POfficially compatibleRB5009UPr+S+OUTOfficial related productnetPower Lite 8POfficial related productMikroTik devices accepting 18–30V DCPotentially compatible if connector and requirements match12–30V access-point deploymentsHighlighted MikroTik use caseOutdoor ISP/WISP sitesWell suitedCCTV distributionSuitable with compatible PoE equipment24V-class MikroTik installationsOften suitable where input range includes 26V48–57V-only equipmentNot suitablePTZ networks requiring high-voltage PoE53V version may be preferable

MikroTik currently lists netPower 16P, RB5009UPr+S+OUT and netPower Lite 8P among the related products for the MTP250-26V94-OD. (MikroTik)

4. Designed for netPower 16P

The netPower 16P officially supports the MTP250-26V94-OD as a power option. It accepts 18–30V or 48–57V DC, allowing operators to choose the voltage architecture that matches their downstream PoE requirements. (MikroTik)

When the netPower 16P receives lower-voltage power, it provides corresponding low-voltage PoE output. MikroTik notes that the switch does not include an onboard voltage converter, so the power-supply voltage matters directly. (MikroTik)

5. Related to RB5009UPr+S+OUT

MikroTik also lists the RB5009UPr+S+OUT as a related product for this supply. The RB5009 outdoor model is a rugged PoE router designed around extensive power-input and redundancy options. (MikroTik)

That makes the MTP250-26V94-OD useful where an outdoor RB5009 is being incorporated into a substantial PoE or WISP installation and a high-capacity DC source is required.

6. Suitable for Lower-Voltage PoE Deployments

The key distinction between this model and the MTP250-53V47-OD is voltage.

The MTP250-26V94-OD is more appropriate where connected equipment operates within a lower DC input range such as 12–30V. MikroTik specifically uses home access points as an example. (MikroTik)

For equipment that requires 48V-class PoE, particularly some higher-power PTZ camera installations, MikroTik suggests considering the 53V version instead.

7. Pole and Wall Mounting

MikroTik designed the MTP250 series for both pole and wall installation.

The official hardware manual explains that the supply can be attached to a mast using the provided steel clamp or mounted on a wall using appropriate screws and wall plugs. (MikroTik Manual)

This flexibility is useful for outdoor network cabinets, masts, perimeter walls and towers.

8. Wide 100–240V AC Input

The power supply accepts 100–240V AC at 50/60Hz, making it suitable for a wide range of electrical environments without a separate AC voltage converter. (MikroTik Manual)

9. Wide Temperature Range

MikroTik tests the MTP250-26V94-OD between -40°C and +70°C. (MikroTik)

That gives the supply enough environmental headroom for many outdoor installations where equipment may be exposed to direct sunlight, cold overnight temperatures or poorly ventilated outdoor enclosures.

10. No Network Configuration Required

The MTP250-26V94-OD is a power supply rather than a network device.

It has no RouterOS, SwOS, IP address, Ethernet ports, wireless radio or WinBox configuration. Once correctly wired and powered, it simply converts AC mains power into DC output.

MikroTik MTP250-26V94-OD Price in Kenya

Senetic Kenya currently lists the MTP250-26V94-OD at KSh 11,380.04 net and KSh 13,200.85 gross, with five units shown available when recently indexed. MikroTik's official suggested price remains US$99. (senetic.co.ke)

Pricing InformationDetailsOfficial MikroTik Suggested PriceUS$99Current Kenya Net Price ObservedApprox. KSh 11,380Current Kenya Gross Price ObservedApprox. KSh 13,201Recent Kenya Availability5 unitsProduct CodeMTP250-26V94-ODOutput26V, 9.4AMaximum Rated Output244WBuying RecommendationVerify device DC-input range before purchase

Local pricing can change with exchange rates, VAT and stock availability, so the current quotation should be confirmed before ordering.

MTP250-26V94-OD vs MTP250-53V47-OD vs 48V2A96WFeatureMTP250-26V94-ODMTP250-53V47-OD48V2A96WOutput Voltage26V53V48VOutput Current9.4A4.7A2AMax Published Output244W249W96WProduct Class250W250W96WOutdoor RatingIP67IP67IndoorPole/Wall MountYesYesNoMain UseLower-voltage outdoor PoEHigh-voltage outdoor PoESmaller indoor 48V PoE deploymentsTypical ScenarioAPs / lower-voltage PoEPTZ / 48V-class PoERouters and smaller PoE switchesOfficial Suggested PriceUS$99US$99US$39

The important factor is not simply wattage. MikroTik explicitly recommends selecting the MTP250 model according to the DC-input requirements of the equipment being powered. (MikroTik)

Why Choose MikroTik MTP250-26V94-OD?

The MTP250-26V94-OD is particularly useful when a high-capacity outdoor power source is needed for a MikroTik network operating around the 24–26V range. Its 9.4A current capacity and 244W maximum output provide considerably more power than ordinary MikroTik wall adapters. (MikroTik Manual)

Its rugged IP67 enclosure, pole/wall mounting options and wide temperature tolerance make it suitable for long-term infrastructure deployments such as WISP towers, outdoor Wi-Fi networks, CCTV systems and campus distribution networks.

Frequently Asked Questions About MikroTik MTP250-26V94-OD

What is MikroTik MTP250-26V94-OD?

It is an outdoor 26V AC/DC power supply designed primarily for MikroTik netPower and compatible outdoor networking installations. (MikroTik)

What is the product code?

The official product code is MTP250-26V94-OD.

What voltage does it output?

It provides 26V DC. (MikroTik Manual)

What is the output current?

The maximum published current is 9.4A. (MikroTik Manual)

How many watts does it provide?

The current MikroTik manual specifies 244W maximum DC output. The product is marketed as a 250W-class power supply. (MikroTik Manual)

Why does the model name contain “94”?

The “94” corresponds to its 9.4A output rating.

What AC voltage does it accept?

It accepts 100–240V AC, 50/60Hz. (MikroTik Manual)

What is the official price?

MikroTik currently lists the MTP250-26V94-OD at US$99. (MikroTik)

What is MTP250-26V94-OD price in Kenya?

Senetic Kenya currently lists it at approximately KSh 11,380.04 net / KSh 13,200.85 gross. (senetic.co.ke)

Is it currently available in Kenya?

Senetic's current listing recently showed five units available. Inventory can change, so stock should be confirmed when ordering. (senetic.co.ke)

Is MTP250-26V94-OD waterproof?

It has an IP67 rating, giving it strong protection from dust and moisture when properly installed. (MikroTik)

Can I install it outside?

Yes. Outdoor use is one of its primary purposes.

Can it be mounted on a pole?

Yes. MikroTik includes a mounting method using a steel clamp for mast installation. (MikroTik Manual)

Can it be mounted on a wall?

Yes. Wall mounting is also supported. (MikroTik Manual)

Does it work with netPower 16P?

Yes. MikroTik explicitly lists the MTP250-26V94-OD as a compatible power option for the netPower 16P. (MikroTik)

What happens when netPower 16P is powered at 26V?

The netPower 16P does not internally convert the voltage to 48V. MikroTik states that its PoE-output voltage follows the supplied voltage architecture, so lower-voltage power is intended for compatible low-voltage PoE devices. (MikroTik)

Is it compatible with RB5009UPr+S+OUT?

MikroTik lists the RB5009UPr+S+OUT as a related product for this supply. Always verify the intended power-input method and overall load for the particular installation. (MikroTik)

Can it be used with access points?

Yes, through compatible networking equipment. MikroTik specifically describes an example using the 26V model where access points accept 12–30V. (MikroTik)

Can it power IP cameras?

Yes, where the cameras and PoE switch support the relevant voltage and PoE arrangement.

Is it recommended for PTZ cameras?

It depends on the camera's power requirement. MikroTik uses higher-power PTZ-camera networks as an example where the 53V MTP250-53V47-OD may be more appropriate. (MikroTik)

What is the difference between MTP250-26V94-OD and MTP250-53V47-OD?

The 26V model supplies 26V at 9.4A, while the 53V model provides 53V at 4.7A. Their total power capacities are similar, but they are intended for different voltage requirements. (MikroTik Manual)

Is the 53V model more powerful?

Not significantly in total watts. The 26V model is rated at 244W and the 53V model at 249W. The real difference is the output-voltage architecture, not simply total power. (MikroTik Manual)

Can I connect the 26V version to a 24V MikroTik device?

Potentially, but only if the device's published DC-input range includes 26V. Never assume compatibility simply because the nominal voltages are close.

Can I connect it to a device that accepts 18–30V?

From a voltage perspective, 26V falls within that range. Connector, polarity, current and total power requirements must still match.

Can I use it with a 48V-only device?

No. A device requiring approximately 48–57V should not be directly powered from this 26V supply.

Does it have Ethernet ports?

No.

Does it provide PoE directly?

No. It provides DC power to a compatible router or switch, which may then provide PoE through Ethernet.

Does it support 802.3af or 802.3at?

The power supply itself does not negotiate PoE. The connected switch determines supported PoE standards.

Does it run RouterOS?

No.

Does it have an IP address?

No.

Can it be managed through WinBox?

No.

Does it require firmware updates?

No.

Is it a UPS?

No. It does not include an internal backup battery.

Will it work during a blackout?

Only if its AC input is provided by an external UPS, inverter, generator or another backup-power system.

Can it be used with solar?

Yes, potentially through an appropriately sized inverter or other correctly engineered power system.

What temperatures can it operate in?

MikroTik tests it from -40°C to +70°C. (MikroTik)

What is the MTBF?

MikroTik specifies approximately 100,000 hours at 25°C. (MikroTik)

What wire should be used for the DC output?

MikroTik specifies copper conductor of at least 1.2 mm² for the DC output connection. (MikroTik Manual)

Does the AC input require an RCD?

MikroTik instructs installers to connect the AC side of the MTP250-series PSU through an RCD. (MikroTik Manual)

Should a professional install it?

Yes. MikroTik states that installation should be carried out by trained and qualified personnel and comply with applicable electrical regulations. (MikroTik Manual)

Is it suitable for WISP networks?

Yes. Its outdoor enclosure, substantial power capacity and pole-mounting design make it particularly useful for WISP distribution sites.

Is it suitable for CCTV networks?

Yes, especially where a MikroTik outdoor PoE switch needs to power several compatible cameras from one centralized power source.

Where can I buy MTP250-26V94-OD in Kenya?

The unit is available through MikroTik networking suppliers in Kenya. When ordering, use the complete MTP250-26V94-OD part number to avoid confusing it with the 53V version.

Installing MikroTik MTP250-26V94-OD

Before installation, check the DC jack input voltage of the MikroTik router or switch receiving power. This is especially important because both MTP250 models look similar but provide very different voltages. The 26V version should only be used where the connected equipment supports its output range. (MikroTik)

The PSU accepts 100–240V AC at 50/60Hz. MikroTik specifies an RCD on the AC input and copper conductor of at least 1.2 mm² on the DC-output side. (MikroTik Manual)

For outdoor installation, the supply can be secured to a pole using the supplied clamp arrangement or mounted to a wall. Although it is IP67-rated, proper cable routing, grounding, surge protection and weather-resistant termination practices remain important for a reliable permanent deployment.

The MikroTik MTP250-26V94-OD is a high-capacity outdoor AC/DC power supply providing 26V at up to 9.4A, or approximately 244W. Its IP67 enclosure, universal AC input and pole/wall mounting make it particularly suitable for outdoor MikroTik PoE infrastructure.

It is a strong option for netPower 16P, RB5009UPr+S+OUT, netPower Lite 8P and compatible lower-voltage outdoor networks, especially where several access points or cameras need to be powered from one outdoor distribution point. The most important requirement is to confirm that the connected equipment accepts the 26V output before installation.

MikroTik lists the unit at US$99, while the current Kenya listing observed is approximately KSh 13,201 gross. For the latest MTP250-26V94-OD price in Kenya, genuine MikroTik outdoor power supplies and related networking equipment, visit MikroTik Kenya for current stock and quotation.