18POW

MikroTik 18POW Price in Kenya – 24V 0.8A Power Adapter

MikroTik 18POW Price in Kenya

The MikroTik 18POW is a compact 24V 0.8A power adapter designed for MikroTik routers and RouterBOARD devices with relatively low power requirements. MikroTik specifically recommends it for routers with low power consumption, making it useful as either an original power source or a replacement adapter for compatible MikroTik hardware.

The adapter accepts 110/220V AC input at 0.7A and provides a regulated 24V DC output at 0.8A. This gives a nominal output capacity of about 19.2W, which is suitable only for MikroTik devices whose voltage and power requirements fall within the adapter's supported limits.

MikroTik currently lists the 18POW at a suggested manufacturer price of US$9. Current Kenyan listings vary significantly: Senetic Kenya lists it at about KSh 922 gross, while another local supplier lists it at around KSh 2,700 excluding VAT. Buyers should therefore confirm stock, VAT and authenticity before ordering.

MikroTik 18POW Specifications

SpecificationDetailsProduct NameMikroTik 18POWProduct Code18POWProduct TypeAC-to-DC power adapterInput Voltage110/220V ACInput Current0.7AOutput Voltage24V DCOutput Current0.8AApprox. Maximum Output Power19.2WRecommended UseMikroTik routers with low power consumptionCoolingPassiveMTBFApprox. 100,000 hours at 25°COfficial Suggested PriceUS$9RouterOS RequiredNoNetwork InterfaceNone

MikroTik's official specification confirms the 24V 0.8A output, 110/220V 0.7A input, approximately 100,000-hour MTBF at 25°C, and US$9 suggested price. (mikrotik.com)

What Is MikroTik 18POW?

The MikroTik 18POW is a dedicated external power supply for compatible MikroTik networking equipment.

A typical connection is:

AC wall outlet → 18POW → MikroTik router DC input

The adapter converts mains electricity into the 24V DC supply required by compatible MikroTik equipment.

It is not a router, PoE injector, UPS or voltage converter for arbitrary devices. The connected equipment must be designed to accept the adapter's voltage and current characteristics.

Key Features of MikroTik 18POW

1. 24V DC Output

The 18POW provides 24V DC at up to 0.8A. (mikrotik.com)

This makes it appropriate for many lower-power MikroTik RouterBOARD devices that support 24V DC input.

The maximum nominal electrical output is approximately:

24V × 0.8A = 19.2W

Devices requiring substantially more than this should use a higher-capacity compatible adapter.

2. Designed for Low-Power MikroTik Routers

MikroTik specifically describes the 18POW as recommended for routers with low power consumption. (mikrotik.com)

This makes it useful for:

• RouterBOARD installations

• Replacement power supplies

• Network labs

• WISP equipment

• Indoor networking cabinets

• Router repair and maintenance

3. Wide AC Input Support

The official MikroTik specification lists 110/220V AC input at 0.7A. (mikrotik.com)

A current distributor specification also describes the supply as supporting approximately 110–240V AC, making it suitable for common mains environments including Kenya's 240V-class supply. (Senetic)

MikroTik 18POW CompatibilityDevice / Product FamilyCompatibility StatusRB433Official related productRB433AHOfficial related productRB450Official related productRB450GOfficial related productRB450Gx4Official related productRB493 SeriesOfficial related productRB411 SeriesOfficial related productRB435GOfficial related productRB911G SeriesOfficial related productRB912UAG SeriesOfficial related productRB850Gx2Official related product911 Lite5 acOfficial related productRBM11GOfficial related productRBM33GOfficial related productGPEN11Official related productGPEN21Official related productL11UG-5HaxDOfficial related productL23UGSR-5HaxD2HaxDOfficial related product

MikroTik's current 18POW page lists all of these among its related products. Compatibility should still be confirmed against the actual device's DC-input voltage and maximum power requirement before connection. (mikrotik.com)

4. Useful as a Replacement Adapter

The 18POW can be useful when:

• The original adapter has failed.

• A spare power supply is required.

• A MikroTik installation is being relocated.

• An integrator needs additional compatible power adapters.

• A networking lab needs standardized 24V supplies.

Before replacing an adapter, always confirm:

• Voltage

• Maximum current

• DC connector size

• Polarity

• Device power consumption

Using the wrong adapter can damage networking equipment.

5. Passive Cooling

A current MikroTik distributor specification identifies the 18POW as a passively cooled power supply. (mikrotik-store.eu)

There is no cooling fan, so the adapter operates silently.

6. No RouterOS or Configuration

The 18POW is purely a power accessory.

It has:

• No RouterOS

• No CPU

• No Ethernet port

• No IP address

• No WinBox configuration

• No firmware updates

• No wireless interface

It simply converts AC mains power to 24V DC.

7. Around 19.2W Maximum Nominal Output

Because it provides 24V at 0.8A, its nominal output capacity is approximately 19.2 watts.

That makes the 18POW a lower-power adapter compared with products such as MikroTik's 24HPOW and 48POW.

Always select the adapter based on the actual power requirement of the connected MikroTik device.

Common Uses of MikroTik 18POW in Kenya

The 18POW is useful for MikroTik router replacements and repairs, particularly where older RouterBOARD devices are still being used in offices, WISP networks and network-control installations.

It can also be kept as a backup adapter by network installers and IT departments. A spare compatible power supply can reduce downtime when an original adapter fails.

For WISPs and integrators using RouterBOARD hardware such as RB912, RB911, RBM11G or RBM33G, the 18POW can be useful where the complete device configuration remains within its output capacity. MikroTik currently lists these products among its related devices. (mikrotik.com)

MikroTik 18POW Price in Kenya

The official MikroTik suggested price for the 18POW is currently US$9. (mikrotik.com)

Current Kenyan prices vary by supplier. Senetic Kenya currently lists the 18POW at approximately KSh 795 net / KSh 922 gross, while Mtech lists it at approximately KSh 2,700 excluding VAT. StarlinkKenya254 also lists the adapter at around KSh 3,600. These should be treated as indicative current market prices rather than a fixed national retail price. (Mtech Computer Shop Nairobi)

Pricing InformationDetailsOfficial MikroTik Suggested PriceUS$9Senetic Kenya ListingApprox. KSh 922 grossMtech Kenya ListingApprox. KSh 2,700 excl. VATAnother Kenya ListingApprox. KSh 3,600Product Code18POWOutput24V 0.8AMaximum Nominal OutputApprox. 19.2WRecommended Buying ApproachConfirm stock, VAT and exact product code18POW vs 24HPOW vs 48POWFeature18POW24HPOW48POWOutput Voltage24V24V48VOutput Current0.8A2.5A1.46AApprox. Nominal Output19.2W60WApprox. 70WMain PurposeLower-power MikroTik routersHigher-power 24V equipment48V MikroTik equipmentOfficial Suggested PriceUS$9US$18US$18Best Selection FactorLow device power requirementHigher 24V power requirementDevice specifically requires 48VInterchangeable?Only where electrical requirements matchOnly where requirements matchNot a 24V substitute

MikroTik's current product catalogue lists the 18POW at US$9, 24HPOW at US$18, and 48POW at US$18. (mikrotik.com)

Why Choose MikroTik 18POW?

The 18POW is a practical option for compatible MikroTik devices that require a relatively modest 24V power supply.

Its main advantages include:

• 24V DC output

• 0.8A maximum output current

• Around 19.2W nominal capacity

• Official MikroTik accessory

• Wide AC input support

• Passive cooling

• Compact replacement supply

• Compatibility with numerous RouterBOARD products

• No software setup

• No RouterOS configuration

• Current manufacturer availability

• Affordable US$9 suggested price

Frequently Asked Questions About MikroTik 18POW

What is MikroTik 18POW?

The MikroTik 18POW is a 24V 0.8A AC-to-DC power adapter recommended for MikroTik routers with low power consumption

What is its product code?

The official product code is 18POW.

What voltage does 18POW output?

It provides 24V DC.

What current does it provide?

The maximum rated output is 0.8A.

How many watts is MikroTik 18POW?

The nominal maximum output can be calculated as:

24V × 0.8A = 19.2W

So it provides approximately 19.2 watts of nominal DC output capacity.

What is the input voltage?

MikroTik lists 110/220V AC at 0.7A.

Can 18POW be used in Kenya?

Yes, provided the supplied mains connection and attached MikroTik equipment are compatible. Current distributor specifications describe the unit for roughly 110–240V AC mains input

What is the official MikroTik 18POW price?

MikroTik currently lists it at US$9.

What is the MikroTik 18POW price in Kenya?

Current listings vary significantly. Recent Kenyan listings range from roughly KSh 900 to KSh 3,600, depending on supplier and VAT treatment.

Is 18POW compatible with RB433?

Yes. MikroTik lists RB433 among its related products.

Can I use it with RB433AH?

Yes. RB433AH is also listed as a related product.

Is it compatible with RB450?

Yes. Both RB450 and RB450G appear in the official related-product list.

Can 18POW power RB450Gx4?

MikroTik currently lists RB450Gx4 among related products for 18POW. Before deployment, the actual device configuration and attached loads should still be checked against the available power

Can it power RBM11G?

Yes. RBM11G is currently listed as a related product.

Is RBM33G compatible?

MikroTik also lists RBM33G.

Can I use it with L11UG-5HaxD?

Yes. MikroTik currently lists L11UG-5HaxD among the related products.

What about L23UGSR-5HaxD2HaxD?

It is also included in MikroTik's current related-product list.

Is the 18POW compatible with every MikroTik router?

No.

Different MikroTik routers require different:

• Voltages

• Current capacities

• Connector arrangements

• Total power

Always check the specific router's power specifications.

Can I use 18POW with a router that needs 48V?

No. The 18POW outputs 24V, not 48V.

Can I use 18POW instead of 48POW?

Only if the device itself supports 24V and operates within the 18POW's available capacity. It should not be treated as a general replacement for a 48V adapter.

What is the difference between 18POW and 24HPOW?

Both provide 24V, but 18POW supplies 0.8A, while the current 24HPOW is a much higher-capacity 24V 2.5A adapter.

Which is more powerful, 18POW or 24HPOW?

24HPOW.

18POW provides about 19.2W nominally, while 24V × 2.5A gives 24HPOW approximately 60W nominal capacity.

Can I use 24HPOW instead of 18POW?

Possibly, where the device accepts 24V and the connector/polarity match. A power supply's higher current capacity does not force the device to consume all available current.

However, voltage and polarity must be correct.

Can I use an 18V power adapter instead?

Do not assume so. Despite the product name 18POW, its output is actually 24V.

The product code should not be interpreted as the output voltage. Always use the published electrical specification rather than guessing from the product name.

Does 18POW provide PoE?

No. It is a DC power adapter.

If you need to deliver its power over Ethernet to a compatible passive-PoE device, you would normally require an appropriate MikroTik PoE injector.

Can 18POW be connected to an RBPOE injector?

Potentially, where the connected equipment accepts the resulting passive PoE voltage and its power needs remain within the complete system's limits.

Does 18POW have Ethernet ports?

No.

Does it run RouterOS?

No.

Does it have firmware?

No.

Can I configure 18POW in WinBox?

No.

Does it have an IP address?

No.

Is 18POW a UPS?

No. It does not contain a backup battery.

Will it continue powering my router during a blackout?

No, unless the AC input itself is supplied through a UPS, inverter or another backup power system.

Can I connect 18POW to a UPS?

Yes. A normal AC UPS can power the adapter, provided the UPS output is suitable.

Can I use it with an inverter?

Yes, provided the inverter produces suitable mains AC output.

Can it be used with solar power?

Yes, indirectly through a suitable inverter or properly designed regulated power system. Avoid connecting an unregulated solar source directly to the router or adapter.

Is 18POW passively cooled?

Yes. Current distributor specifications identify it as a passive power supply with no cooling fan.

Does it make noise?

It has no cooling fan, so normal operation should be effectively silent.

Does 18POW get warm?

Power adapters can become warm in normal operation. It should be placed in a ventilated area and not covered by insulating materials.

Is 18POW waterproof?

No outdoor IP rating is specified by MikroTik for the adapter. It should generally be treated as an indoor power accessory. A current Kenya distributor also identifies it as an indoor power supply.

Can I install it outdoors?

Not exposed directly to weather. If used as part of an outdoor network installation, it should remain inside an appropriately protected enclosure.

What is the operating temperature?

A current distributor lists approximately -30°C to +50°C for the adapter.

What is the MTBF?

MikroTik publishes approximately 100,000 hours at 25°C.

Can I use 18POW for CCTV equipment?

Only if the CCTV equipment specifically accepts 24V DC with the correct connector and polarity and consumes less than the available output. The adapter is primarily intended for compatible MikroTik routers.

Can I power multiple routers from one 18POW?

That is not its intended standard use. Power distribution would require proper engineering, and the total load could not exceed the supply's limits.

Is it suitable for WISP installations?

Yes. It can power compatible lower-power MikroTik RouterBOARD devices used in WISP systems.

Can I use it as a spare adapter?

Yes. It is useful as a replacement or backup adapter for compatible MikroTik equipment.

How do I know if 18POW is compatible with my router?

Check the router's specifications for:

• DC input voltage

• Maximum power consumption

• Connector type

• Polarity

If 24V is supported and the device's load stays within the adapter's capability, the 18POW may be suitable.

Can a power supply with too little current damage the router?

An undersized adapter can cause instability, voltage drop, rebooting or adapter overheating. Always use a supply with sufficient capacity.

Can too much current damage the router?

A properly regulated supply with the correct voltage can have a higher maximum current rating because the router draws only the current it needs. Voltage and polarity are more critical.

Can too much voltage damage a MikroTik router?

Yes. Never connect a voltage outside the router's supported input range.

Does the 18POW include a router?

No. It is sold as a power adapter only.

Is the power cable included?

Distributor packages commonly include the necessary AC cable, but package contents can vary by regional version or supplier. Confirm before purchasing.

Is the 18POW still available?

Yes. MikroTik currently lists it in its product catalogue at US$9.

Where can I buy MikroTik 18POW in Kenya?

The adapter is currently listed by several Kenyan networking suppliers. Prices differ considerably, so confirm the exact 18POW 24V 0.8A product, warranty, VAT status and stock before ordering.

Installing MikroTik 18POW

Before connection, check the MikroTik router's input specifications and verify that it accepts 24V DC and does not require more power than the adapter can provide. Never rely only on connector fit, because two adapters may physically fit while providing different voltages.

Connect the adapter's DC plug to the compatible MikroTik device and then connect the AC side to a suitable mains outlet. Keep the adapter indoors, dry and reasonably ventilated. If the router is installed outdoors, the adapter should normally remain inside a protected enclosure or indoor location while power is routed appropriately.

If the router fails to start, repeatedly reboots or becomes unstable under load, verify the router's total power requirement and attached accessories. Devices with higher consumption may require a more powerful MikroTik supply such as the 24HPOW rather than the lower-capacity 18POW.

The MikroTik 18POW is a compact 24V 0.8A power adapter intended for MikroTik routers and RouterBOARD devices with relatively low power consumption. Its nominal output capacity of approximately 19.2W makes it suitable for many lower-power networking installations, provided the connected equipment supports 24V input.

With wide AC input support, passive operation, approximately 100,000-hour MTBF at 25°C, and compatibility with numerous MikroTik RouterBOARD products, the 18POW is a practical choice for new installations, replacement power supplies and backup stock for network technicians.

MikroTik currently lists the 18POW at US$9, while current Kenyan listings range considerably depending on supplier and VAT treatment. For the latest MikroTik 18POW price in Kenya, MikroTik power adapters, RouterBOARD accessories and networking power solutions, visit Mikrotik Kenya for current pricing and availability.