MikroTik L009UiGS-RM Datasheet

MikroTik L009UiGS-RM Datasheet and Specifications

The MikroTik L009UiGS-RM is a professional wired router designed as a modern replacement for the long-running RB2011 series. It combines a dual-core ARM processor, eight Gigabit Ethernet ports, a 2.5G-capable SFP interface, USB 3.0, PoE input, Passive PoE output and RouterOS v7 in a compact rack-friendly enclosure.

MikroTik positions the L009 series as a major upgrade over the RB2011, with improved routing and filtering performance, more RAM, modern ARM architecture, container support and better rack-space efficiency.

You can view the MikroTik L009UiGS-RM or browse other MikroTik products in Kenya.

MikroTik L009UiGS-RM Full Datasheet

SpecificationDetailsProduct CodeL009UiGS-RMCPUIPQ-5018CPU Cores2CPU Frequency800 MHzCPU ArchitectureARMRAM512 MBStorage128 MB NANDEthernet Ports8 × 10/100/1000 MbpsSFP Ports1 × SFP, up to 2.5G supportedSwitch ChipMarvell 88E6190USB1 × USB 3.0 Type-ASerial ConsoleRJ45RouterOSRouterOS v7RouterOS LicenceLevel 5PoE Input802.3af/atPoE Input PortEther1PoE OutputPassive PoEPoE Output PortEther8Input Voltage24–56 VMaximum Power Consumption40 WPower Consumption Without Attachments8 WCoolingPassiveDimensions220 × 125 × 22 mmOperating Temperature-40°C to +70°CIP RatingIP20MTBFApprox. 200,000 hours at 25°C

The values above are based on MikroTik’s current official L009UiGS-RM specifications.

Dual-Core ARM Processor

The L009UiGS-RM uses the IPQ-5018 dual-core processor running at a nominal 800 MHz.

The modern ARM platform is important because it gives the router better support for current RouterOS features and provides significantly more processing capability than older MIPS-based MikroTik products.

MikroTik says the L009 can be up to four times faster than the RB2011 in many common configurations.

The processor is particularly useful for:

• routing

• firewall filtering

• VLANs

• NAT

• IPsec

• PPPoE

• bandwidth management

• advanced RouterOS services

• container projects

512 MB RAM and 128 MB NAND Storage

The L009UiGS-RM includes:

512 MB RAM

and:

128 MB NAND storage

This gives it substantially more memory than many older MikroTik RouterBOARD devices and provides enough resources for moderately complex RouterOS deployments.

The ARM platform and available memory also support RouterOS container functionality for advanced users.

Eight Gigabit Ethernet Ports

The L009UiGS-RM has:

8 × 10/100/1000 Mbps Ethernet ports

This is one of its strongest features.

A typical professional configuration could use:

• Ether1 – WAN

• Ether2 – Office LAN

• Ether3 – CCTV

• Ether4 – Access points

• Ether5 – Servers

• Ether6 – VoIP

• Ether7 – Management

• Ether8 – PoE device

The exact configuration is fully customizable through RouterOS.

Eight Gigabit ports make the L009 particularly attractive for professional installations where several physical network segments need to connect directly to the router.

2.5G SFP Connectivity

The L009UiGS-RM has one SFP interface capable of supporting compatible 2.5 Gigabit connectivity.

This can be useful for:

• fibre uplinks

• ISP connections

• managed-switch uplinks

• server-room infrastructure

• network backbones

The 2.5G capability provides more room for expansion than a standard Gigabit-only SFP interface.

Marvell 88E6190 Switch Chip

The router uses a Marvell 88E6190 switch chip.

The switch chip allows the Ethernet interfaces to be used efficiently for switching and bridge-based configurations.

This is particularly useful for networks using:

• VLANs

• hardware-assisted switching

• multiple LAN segments

• trunk links

• access ports

Correct RouterOS bridge and VLAN configuration is still important to obtain the expected performance.

RouterOS v7

The MikroTik L009UiGS-RM runs RouterOS v7 with a Level 5 licence.

RouterOS gives administrators access to professional networking functionality including:

• firewall

• DHCP

• NAT

• VLAN

• PPPoE

• hotspot

• VPN

• bandwidth queues

• static routing

• dynamic routing

• failover

• load balancing

• scripting

• monitoring

The device comes with RouterOS preinstalled and licensed, so there is no need to purchase the operating system separately. MikroTik also states that software updates are provided for the life of the product or for at least five years from purchase.

USB 3.0 Type-A

The L009UiGS-RM includes:

1 × USB 3.0 Type-A port

with a maximum USB current of 1.5 A.

Potential uses include:

• compatible LTE modems

• external storage

• RouterOS container storage

• custom networking projects

MikroTik specifically highlights combining the USB port and ARM processor for custom container applications.

Container Support

Because the router uses ARM architecture and RouterOS v7, it can support RouterOS containers.

Possible applications may include:

• DNS filtering

• Pi-hole-style services

• lightweight monitoring applications

• custom network tools

Containers should still be used carefully because this is primarily a router, not a general-purpose server.

PoE Input

The L009UiGS-RM supports 802.3af/at PoE input through Ether1.

Supported PoE input voltage is:

24–56 V

This means the router can be powered through Ethernet using compatible PoE infrastructure.

It can also be powered using the DC jack.

Passive PoE Output

Ether8 provides Passive PoE output.

The official current limits are:

• up to 1 A at lower voltage

• up to 450 mA at higher voltage

• maximum total output of 1 A

The official brochure notes that PoE-out works only when the router is powered through the DC jack.

PoE output can be useful for powering compatible:

• access points

• wireless CPEs

• MikroTik networking devices

Always confirm the voltage requirements of the connected equipment before using Passive PoE.

Power Consumption

According to MikroTik’s current product specifications:

Maximum power consumption: 40 W

Maximum power consumption without attachments: 8 W.

The router supports:

• DC jack input

• PoE input

with a supported voltage range of:

24–56 V

Passive Cooling

The L009UiGS-RM uses passive cooling.

There is no internal cooling fan.

This makes it useful for:

• offices

• server rooms

• home labs

• network cabinets

• professional installations

The metal enclosure acts as part of the heat-dissipation system.

Rackmount Design

The RM designation indicates that this version is supplied with rackmount accessories.

MikroTik specifically designed the enclosure so several L009 devices can be installed very efficiently within standard server racks.

The official L009UiGS-RM dimensions are:

220 × 125 × 22 mm.

The compact enclosure is particularly useful for ISPs and system administrators who need to maximize available rack space.

Included Accessories

The current official product listing shows the following included accessories:

• 24 V 1.5 A power adapter

• K-79 rackmount kit

• K-55 screw kit

• K-87 mounting accessory

• adhesive pads

Package contents should still be confirmed with the seller when purchasing.

L009UiGS-RM Routing Performance

MikroTik publishes laboratory routing results for the L009 platform.

With 1518-byte packets, its published tests show approximately:

Fast-path routing: 3.42 Gbps

Routing with 25 simple queues: 1.74 Gbps

Routing with 25 firewall rules: 970 Mbps.

These results are laboratory benchmarks rather than guaranteed real-world speeds.

Actual performance depends on:

• packet size

• firewall rules

• queues

• VPN use

• NAT

• VLAN configuration

• network topology

• RouterOS features in use

Bridging Performance

The published 1518-byte bridging results include approximately:

Fast-path bridging: 3.43 Gbps

25 bridge filter rules: 2.12 Gbps.

This makes the L009 suitable for networks where both routing and switching functionality are required.

Is the L009UiGS-RM Good for ISPs?

Yes, the L009UiGS-RM can be useful for smaller ISP and WISP environments depending on network size and configuration.

RouterOS supports:

• PPPoE

• VLANs

• queues

• bandwidth management

• routing

• firewall

• hotspot

• VPN

• network monitoring

ISPs can also use Tajira for billing and subscriber-management workflows alongside MikroTik infrastructure.

However, the L009 should not automatically be selected for every ISP.

Networks with higher bandwidth, many subscribers or complex processing requirements may benefit from routers such as the RB4011, RB5009 or MikroTik CCR series.

L009UiGS-RM for Businesses

The L009UiGS-RM is particularly well suited to small and medium-sized business networks.

Its eight Gigabit interfaces can be used to separate:

• staff

• CCTV

• servers

• access points

• VoIP

• management

• guest networks

RouterOS VLAN and firewall features provide further segmentation without requiring each service to have a completely separate physical network.

L009UiGS-RM for CCTV Networks

CCTV installers can also use the L009 for professional surveillance networks.

For example:

Ether1 – WAN

Ether2 – NVR

Ether3 – CCTV switch

Ether4 – Office LAN

Other interfaces – access points and management

RouterOS can then provide:

• CCTV VLANs

• firewall rules

• VPN access

• bandwidth control

• routing

This can provide better separation between surveillance equipment and normal office devices.

L009UiGS-RM vs L009UiGS-2HaxD-IN

The MikroTik L009UiGS-2HaxD-IN is closely related to the RM model.

The main difference is built-in wireless.

The L009UiGS-2HaxD-IN includes 2.4 GHz Wi-Fi 6.

The L009UiGS-RM does not include integrated Wi-Fi. MikroTik describes the RM model as being almost identical to the indoor wireless version except for the 2.4 GHz radio and the included rackmount accessories.

Choose the RM version when:

• you already use dedicated access points

• you need rack installation

• you want a wired router

• built-in Wi-Fi is unnecessary

Choose the 2HaxD-IN when integrated wireless is useful.

L009UiGS-RM vs RB4011

The MikroTik RB4011iGS+RM is a more powerful routing platform for demanding professional networks.

The RB4011 offers:

• quad-core processor

• ten Gigabit Ethernet ports

• 10G SFP+ connectivity

The L009 provides:

• newer ARM platform

• USB 3.0

• 2.5G SFP

• lower power consumption

• compact rack-friendly enclosure

• a lower-cost professional option

For heavy ISP routing, VPN workloads or complex firewall configurations, RB4011 may offer more performance headroom.

For many small businesses and professional networks, L009 can offer very good value.

L009UiGS-RM vs RB2011

The L009 is intended as the modern successor to the RB2011.

Compared with the RB2011, it provides:

• faster ARM processor

• more RAM

• all-Gigabit Ethernet ports

• 2.5G SFP support

• USB 3.0

• improved PoE

• container support

• compact rackmount design

MikroTik states the L009 can be up to four times faster than the RB2011 in many configurations.

For networks still using RB2011 hardware, the L009 is therefore a logical upgrade option.

Main Advantages of the L009UiGS-RM

The key strengths include:

• 8 × Gigabit Ethernet

• 2.5G SFP

• 512 MB RAM

• ARM processor

• USB 3.0

• PoE input

• Passive PoE output

• RouterOS Level 5

• RouterOS v7

• container support

• fanless design

• rackmount accessories

• compact enclosure

L009UiGS-RM Limitations

The main limitations include:

No Built-In Wi-Fi

This model is designed primarily for wired networks.

Dedicated access points are required for wireless coverage.

Dual-Core CPU

The processor is capable for many professional applications, but high-end ISP and enterprise networks may need more powerful hardware.

One SFP Port

Networks requiring multiple high-speed fibre links may need an additional MikroTik switch or a higher-end router.

No 10G SFP+

The SFP interface supports up to compatible 2.5G operation rather than the 10G SFP+ interface available on products such as the RB4011.

Where to Buy L009UiGS-RM in Kenya

You can view the MikroTik L009UiGS-RM on MikroTik Kenya.

You can also browse MikroTik products in Kenya or compare MikroTik router prices in Kenya.

Additional MikroTik products are available through Orbitlink Solutions.

Frequently Asked Questions

What CPU does MikroTik L009UiGS-RM use?

It uses an IPQ-5018 dual-core CPU running at 800 MHz.

How much RAM does L009UiGS-RM have?

It has 512 MB RAM and 128 MB NAND storage.

How many Ethernet ports does L009UiGS-RM have?

It has eight Gigabit Ethernet ports.

Does L009UiGS-RM support 2.5G?

Yes. Its SFP interface supports compatible 2.5 Gigabit connectivity.

Does the L009UiGS-RM have Wi-Fi?

No. This RM model does not include built-in wireless.

Does the L009UiGS-RM support PoE?

Yes. It supports 802.3af/at PoE input on Ether1 and Passive PoE output on Ether8.

Does the L009UiGS-RM have USB?

Yes. It includes one USB 3.0 Type-A port.

Can the L009UiGS-RM be rack mounted?

Yes. The RM version includes rackmount accessories.

Is the L009UiGS-RM suitable for an ISP?

Yes, for appropriately sized networks. Larger deployments should evaluate higher-performance models such as RB4011, RB5009 or CCR routers.

What RouterOS licence does the L009UiGS-RM have?

It comes with RouterOS Level 5 and RouterOS v7.

Final Thoughts on the MikroTik L009UiGS-RM Datasheet

The MikroTik L009UiGS-RM offers a strong set of specifications for businesses, network technicians, CCTV installers and smaller ISP deployments.

Its combination of eight Gigabit Ethernet ports, 2.5G SFP connectivity, 512 MB RAM, USB 3.0, PoE, ARM processing and RouterOS v7 provides significantly more flexibility than older entry-level MikroTik routers.

It is particularly attractive when you need a wired, rackmount professional router without paying for built-in Wi-Fi that will not be used.

For networks requiring substantially higher routing performance or 10G connectivity, the RB4011, RB5009 or MikroTik CCR range may be more appropriate.

For many professional Gigabit networks, however, the L009UiGS-RM offers an excellent balance between connectivity, RouterOS features, rack efficiency and price.